0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-19 08:03:22 +00:00
qmk_firmware/keyboards/converter/modelm101/readme.md
iw0rm3r 4974683040 [Keyboard] IBM Model M (ANSI/ISO) Teensy 2.0++ conversion ()
* Added initial modelm101 config

* Update keyboards/modelm101/keymaps/default/keymap.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/modelm101/keymaps/iw0rm3r/keymap.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/modelm101/readme.md

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Added wiring notes to clarify use of the config

* Small fix

* Small fix

* Moved modelm101 to converter directory

* Added info.json file for QMK configurator

* Corrected path

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/readme.md

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Update keyboards/converter/modelm101/modelm101.c

Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com>

* Replaced DDR and PORT with QMK functions
2019-04-14 20:58:56 -07:00

2.8 KiB

modelm101

IBM Model M 101 ANSI/102 ISO

This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus.
Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy 2.0++ board (produced by PJRC).
Project is heavely based on 2 other projects:

  1. Teensy 2.0++-based custom Model M controller running TMK firmware ('modelm" by lmorchard); - had a few issues.
  2. Teensy 2.0++-based custom Model M 122-key controller running QMK firmware ("ibm122m" by lukexorz); - had wrong layout for 101/102-key boards and no status LED support.

For this conversion you will need:

  1. Teensy 2.0++ dev board itself (can be used a different dev board, but it will require some changes in configuration);
  2. Ribbon connectors to connect the membrane to a dev board. Depending on your Model M variation, you will need 1 Trio-mate 16pin connector (6-520315-6 or 6-520415-6) and 1 Trio-mate 8pin connector (5-120628-8 or 5-520314-8), or 2 Trio-mate 16pin connectors;
  3. Full-sized breadboard (without power rails; half-size should do, but full-sized one looks more native) or a PCB to wire everything up;
  4. A bunch of jumper wires;
  5. mini-USB male cable with any USB socket you want to use to connect Teensy inside the keyboard to your PC (I use short mini-USB male to mini-USB female cable);
  6. (optional) Resistors for connecting status LEDs if your LED PCB doesn't have any;
  7. (optional) Double-sided tape to fix USB socket on or inside the keyboard case.

Pins of the Teensy board you should use by default:

Columns: 1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16  
Pins:    C7 C6 C5 C4 C3 C2 C1 C0 E1 E0 D7 D6 D5 D4 D3 D2  
--------------------------------------------------------  
Rows: 1  2  3  4  5  6  7  8  
Pins: F7 F6 F5 F4 F3 F2 F1 F0  
--------------------------------------------------------  
Status LEDs: CapsLock +5V ScrollLock NumLock  
Pins:        B6       5V  B5         B4  

Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires.

Keyboard Maintainer: iw0rm3r
Hardware Supported: Teensy 2.0++ board by PJRC
Hardware Availability: https://www.pjrc.com/store/teensypp.html

Make example for this keyboard (after setting up your build environment):

make converter/modelm101:default:teensy

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.