mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-23 18:09:53 +00:00
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# Blaster 75
|
|
|
|
Blaster 75 is a 75% ANSI layout Custom Keyboard designed and manufactured by Altain.
|
|
|
|
* Keyboard Maintainer : ALTAiN
|
|
* Hardware Supported : Blaster 75
|
|
* Hardware Availability : Produced and Sold by ALTAiN
|
|
* Mount : Top-Mount System
|
|
* Typing Angle : 6 Degree
|
|
* Front Height : 20.2mm
|
|
|
|
## How to enter Bootloader Mode
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
|
|
We strongly recommend this method. If the PCB is not soldered with switches at the moment, use anything that's metal (twizzers for example)
|
|
to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in.
|
|
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make blaster75:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make blaster75:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|