mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-22 19:39:27 +00:00
1.3 KiB
1.3 KiB
Center x Enter
A 30% keyboard with the enter key placed in the center. Option to install a rotary encoder is also available. VIA (Remap) is also supported.
- Keyboard Maintainer: takashicompany
- Hardware Supported: Center x Enter PCB, Pro Micro
- Hardware Availability: https://github.com/takashicompany/center-enter
Make example for this keyboard (after setting up your build environment):
make takashicompany/center_enter:default
Flashing example for this keyboard:
make takashicompany/center_enter:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available