mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 14:13:27 +00:00
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# BAMFK-1
|
|
|
|
|
|
|
|
PCB for the Big Switch with support for horizontal rotary encoders.
|
|
|
|
* Keyboard Maintainer: [Keebio](https://github.com/nooges)
|
|
* Hardware Supported: BAMFK-1 PCB
|
|
* Hardware Availability: [Keebio](https://keeb.io/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make keebio/bamfk1:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make keebio/bamfk1:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|