mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 06:10:53 +00:00
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# Djinn
|
|
|
|
|
|
|
|
The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.
|
|
|
|
Keyboard Maintainer: [tzarc](https://github.com/tzarc)
|
|
Hardware Supported: Djinn: rev1, rev2
|
|
Hardware Availability: [Open-source](https://github.com/tzarc/djinn)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tzarc/djinn/rev2:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make tzarc/djinn/rev2:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top-left key and plug in the keyboard.
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
|