gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-21 09:03:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
09243ae686
qmk_firmware/keyboards/rgbkb/zen/readme.md
XScorpion2 4cdb86c730 [Keyboard] Create RGBKB Folder (#5858) 
* Move Sol, Zen, & Zygomorph keyboards to RGBKB folder

* Updated default keymaps

* Fixing more areas due too folder moves

* Fixing Zen layer numbers

* Fixing zygomorph layer comments

* Fixing Colmak comments

* Fixing Sol Colmak readme

* Macro alignment

* Zen rev2 configuration json

* Fixing sol ifdef

* Fixing Sol info.json
2019-05-14 11:58:56 -07:00

1.8 KiB
Raw Blame History

Zen Keyboard

A split ergo keyboard with a few goals in mind:

  • Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick including switches and caps when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps.
  • Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
  • Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright
  • Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
  • Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the QMK Proton-C and the Keeb.io Elite-C

Keyboard Maintainer: Legonut Hardware Supported: Zen rev1, Zen rev2 Hardware Availability: RGBKB.net

A build guide and more info for this keyboard can be found here: Zen Build Guide.

Make example for this keyboard (after setting up your build environment):

make rgbkb/zen/rev2:default

To build for a Proton-C:

make rgbkb/zen/rev2:default CTPC=yes

Note: The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes.

See build environment setup then the make instructions for more information.