mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-04 17:05:17 +00:00
29 lines
1.1 KiB
Markdown
29 lines
1.1 KiB
Markdown
# Elrgo S Split Keyboard
|
|
|
|
This is a fork of the VOID Ergo S with QMK Configurator support.
|
|
|
|
Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.
|
|
|
|
[Building guide, models for 3D printing](https://github.com/Eloren1/Elrgo_S)
|
|
|
|
* Keyboard Maintainer: [Eloren](https://github.com/Eloren1)
|
|
* Hardware Supported: Arduino Pro Micro
|
|
* Hardware Availability: [Open Source](https://github.com/Eloren1/Elrgo_S)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/elrgo_s:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/elrgo_s:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* **Physical reset button**: Briefly press the button through the hole on the left side of the case.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|