mirror of https://github.com/qmk/qmk_firmware
353 lines
14 KiB
Markdown
Executable File
353 lines
14 KiB
Markdown
Executable File
#Planck Advanced (but not too advanced) `cygwin` Users Guide
|
|
If you are a user of the [cygwin environment](https://cygwin.com) in Windows and want the freedom to use the latest tools available, then this is the guide for you. If compiling your own copy of the latest and greatest Gnu C Compiler makes you super happy, then this is the guide for you. If the command line make you smile, then this is the guide for you.
|
|
|
|
This guide was written step by step as I went through the process on a `Windows 10` `x86_64` and a `Windows 7` `amd k10` based system. This should be generally applicable to to any `Windows` environment with `cygwin`.
|
|
|
|
#####Do not skip steps. Do not move past a step until the previous step finishes successfully.
|
|
|
|
Based on [avr-libc installation guide](http://www.nongnu.org/avr-libc/user-manual/install_tools.html)
|
|
|
|
##Get the Required Packages
|
|
Download the `cygwin` setup ([x86_64](https://cygwin.com/setup-x86_64.exe)) and install the default system plus the following if they are not already selected:
|
|
- devel/git
|
|
- devel/gcc-core
|
|
- devel/gcc-g++
|
|
- devel/flex
|
|
- devel/bison
|
|
- devel/make
|
|
- devel/texinfo
|
|
- devel/gettext-devel
|
|
- devel/automake
|
|
- devel/autoconfig
|
|
- devel/libtool
|
|
- text/gettext
|
|
- libs/libgcc1
|
|
- interpreters/m4
|
|
- web/wget
|
|
- archive/unzip
|
|
|
|
The following sources will be required:
|
|
- [gmp](https://gmplib.org/) (6.1.0)
|
|
- [mpfr](http://www.mpfr.org/) (3.1.4)
|
|
- [mpc](http://www.multiprecision.org/) (1.0.3)
|
|
- [binutils](https://www.sourceware.org/binutils/) (2.26)
|
|
- [gcc](https://gcc.gnu.org/) (5.3.0)
|
|
- [avr-libc](http://www.nongnu.org/avr-libc/) (2.0.0)
|
|
|
|
The `dfu-programmer` will be required to flash the new firmware
|
|
- [dfu-programmer](https://dfu-programmer.github.io/) (0.7.2)
|
|
|
|
The set of commands below will create a directory (`~/local/avr`) for the sources you compile to be installed on the machine and a directory (`~/src`) for these source files to be stored. The commands then download the sources of the needed packages and unpack them. Note: the expand commands are different depending on if the packages are offered as a `bz2` or `gz` archive
|
|
```
|
|
$ mkdir ~/local
|
|
$ mkdir ~/local/avr
|
|
$ mkdir ~/src
|
|
$ cd ~/src
|
|
$ wget https://gmplib.org/download/gmp/gmp-6.1.0.tar.bz2
|
|
$ wget http://www.mpfr.org/mpfr-3.1.4/mpfr-3.1.4.tar.bz2
|
|
$ wget ftp://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
|
|
$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.gz
|
|
$ wget http://mirror0.babylon.network/gcc/releases/gcc-5.3.0/gcc-5.3.0.tar.gz
|
|
$ wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-2.0.0.tar.bz2
|
|
$ tar -xjf gmp-6.1.0.tar.bz2
|
|
$ tar -xjf mpfr-3.1.4.tar.bz2
|
|
$ tar -zxf mpc-1.0.3.tar.gz
|
|
$ tar -zxf binutils-2.26.tar.gz
|
|
$ tar -zxf gcc-5.3.0.tar.gz
|
|
$ tar -xjf avr-libc-2.0.0.tar.bz2
|
|
```
|
|
|
|
##Setup the Build Environment
|
|
These commands will set up the install directory and the `PATH` variable, which will allow you to access your installed packages. Note: if you close the `cygwin` terminal window, you will need to rerun these commands, they are not permanent.
|
|
```
|
|
$ PREFIX=$HOME/local/avr
|
|
$ export PREFIX
|
|
$ PATH=/usr/local/bin:/usr/local/lib:/usr/local/include:/bin:/lib:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS
|
|
$ PATH=$PATH:$PREFIX/bin:$PREFIX/lib
|
|
$ export PATH
|
|
```
|
|
|
|
##The `gcc` Required Math Library Packages
|
|
The following packages are required to be complied and installed in order to compile `gcc`. They are not sufficiently available through the `cygwin` package system, so we have to make them ourselves. They must be complied in this order because each one depends on the previous. Verfiy that for each package, `make check` returns all passing and no fails.
|
|
|
|
###Build and Install `gmp`
|
|
```
|
|
$ cd ~/src/gmp-6.1.0
|
|
$ ./configure --enable-static --disable-shared
|
|
$ make
|
|
$ make check
|
|
$ make install
|
|
```
|
|
|
|
###Build and Install `mpfr`
|
|
```
|
|
$ cd ~/src/mpfr-3.1.4
|
|
$ ./configure --with-gmp-build=../gmp-6.1.0 --enable-static --disable-shared
|
|
$ make
|
|
$ make check
|
|
$ make install
|
|
```
|
|
|
|
###Build and Install `mpc`
|
|
```
|
|
$ cd ~/src/mpc-1.0.3
|
|
$ ./configure --with-gmp=/usr/local --with-mpfr=/usr/local --enable-static --disable-shared
|
|
$ make
|
|
$ make check
|
|
$ make install
|
|
```
|
|
|
|
##OPTIONAL Part
|
|
You can build and install a brand new `gcc` or you can use the one supplied by `cygwin`. This will take about 4-5 hours to compile (It is a "native build", so it does the entire build **3 times**. This takes a long while).
|
|
|
|
###Build and Install `gcc` for Your Machine
|
|
```
|
|
$ cd ~/src/gcc-5.3.0
|
|
$ mkdir obj-local
|
|
$ cd obj-local
|
|
$ ../configure --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared
|
|
$ make
|
|
$ make install
|
|
```
|
|
##End OPTIONAL Part
|
|
|
|
###Build and Install `binutils` for Your Machine
|
|
```
|
|
$ cd ~/src/binutils-2.26
|
|
$ mkdir obj-local
|
|
$ cd obj-local
|
|
$ ../configure
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
##Buliding `binutils`, `gcc`, and `avr-libc` for the AVR system
|
|
Now we can make the critical stuff for compiling our firmware: `binutils`, `gcc`, and `avr-libc` for the AVR architecture. These allow us to build and manipulate the firmware for the keyboard.
|
|
|
|
###Build `binutils` for AVR
|
|
If you plan to build and install `avr-gdb` also, use the `gdb` install at the end of this guide as it also builds the `binutils`
|
|
```
|
|
$ cd ~/src/binutils-2.26
|
|
$ mkdir obj-avr
|
|
$ cd obj-avr
|
|
$ ../configure --prefix=$PREFIX --target=avr --disable-nls
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
###Build `gcc` for AVR
|
|
```
|
|
$ cd ~/src/gcc-5.3.0
|
|
$ mkdir obj-avr
|
|
$ cd obj-avr
|
|
$ ../configure --prefix=$PREFIX --target=avr --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared --disable-nls --disable-libssp --with-dwarf2
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
###Build `avr-libc` for AVR
|
|
For building the `avr-libc`, we have to specify the host build system. In my case it is `x86_64-unknown-cygwin`. You can look for build system type in the `gcc` configure notes for the proper `--build` specification to pass when you configure `avr-libc`.
|
|
```
|
|
$ cd ~/src/avr-libc-2.0.0
|
|
$ ./configure --prefix=$PREFIX --build=x86_64-unknown-cygwin --host=avr
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
##Building 'dfu-programmer' for flashing the firmware via USB and installing the drivers
|
|
We can either build our own, or use the precomplied binaries. The precompiled binaries don't play well with `cygwin` so it is better to build them ourselves. The procedure for the precompiled binaries is included at the end of this guide.
|
|
|
|
### Build and Install the `libusb`
|
|
The `dfu-programmer` requires `libusb` so that it can interact with the USB system. These repos must be bootstrapped in order to create an appropriate `./configure` and `Makefile` for your system.
|
|
```
|
|
$ cd ~/src
|
|
$ git clone https://github.com/libusb/libusb.git
|
|
$ cd libusb
|
|
$ ./bootstrap.sh
|
|
$ ./configure
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
### Build and Install the `dfu-programmer`
|
|
```
|
|
$ cd ~/src
|
|
$ git clone https://github.com/dfu-programmer/dfu-programmer.git
|
|
$ cd dfu-programmer
|
|
$ ./bootstrap.sh
|
|
$ ./configure
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
Verify the installation with:
|
|
```
|
|
$ which dfu-programmer
|
|
/usr/local/bin/dfu-programmer
|
|
|
|
$ dfu-programmer
|
|
dfu-programmer 0.7.2
|
|
https://github.com/dfu-programmer/dfu-programmer
|
|
Type 'dfu-programmer --help' for a list of commands
|
|
'dfu-programmer --targets' to list supported target devices
|
|
```
|
|
If you are not getting the above result, you will not be able to flash the firmware!
|
|
|
|
###Install the USB drivers
|
|
The drivers are included in the windows binary version of [`dfu-programmer` 0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip).
|
|
```
|
|
$ cd ~/src
|
|
$ wget http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip
|
|
$ unzip dfu-programmer-win-0.7.2.zip -d dfu-programmer-win-0.7.2
|
|
```
|
|
|
|
or
|
|
|
|
The official drivers are found in [Atmel's `FLIP` installer](http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe). Download and then install `FLIP`. Upon installation, the drivers will be found in `C:\Program Files (x86)\Atmel\Flip 3.4.7\usb`.
|
|
|
|
Then, from an **administrator-privileged** `Windows` terminal, run the following command (adjust the path for username, etc. as necessary) and accept the prompt that pops up:
|
|
```
|
|
C:\> pnputil -i -a C:\cygwin64\home\Kevin\src\dfu-programmer-win-0.7.2\dfu-prog-usb-1.2.2\atmel_usb_dfu.inf
|
|
or
|
|
C:\> pnputil -i -a "C:\Program Files (x86)\Atmel\Flip 3.4.7\usb\atmel_usb_dfu.inf"
|
|
```
|
|
|
|
This should be the result:
|
|
```
|
|
Microsoft PnP Utility
|
|
|
|
Processing inf : atmel_usb_dfu.inf
|
|
Successfully installed the driver on a device on the system.
|
|
Driver package added successfully.
|
|
Published name : oem104.inf
|
|
|
|
|
|
Total attempted: 1
|
|
Number successfully imported: 1
|
|
```
|
|
|
|
Alternatively, the `Windows` driver can be installed when prompted by `Windows` when the keyboard is attached. Do not let `Windows` search for a driver; specify the path to search for a driver and point it to the `atmel_usb_dfu.inf` file.
|
|
|
|
##Building and Flashing the Planck firmware!
|
|
If you did everything else right. This part should be a snap! Grab the latest sources from `github`, make the Plank firmware, then flash it.
|
|
|
|
###Build Planck and Load the Firmware
|
|
```
|
|
$ cd ~/src
|
|
$ git clone https://github.com/jackhumbert/qmk_firmware.git
|
|
$ cd qmk_firmware/keyboards/planck
|
|
$ make
|
|
```
|
|
|
|
Make sure there are no errors. You should end up with this or something similar:
|
|
```
|
|
Creating load file for Flash: planck.hex
|
|
avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature planck.elf planck.hex
|
|
|
|
Creating load file for EEPROM: planck.eep
|
|
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 --no-change-warnings -O ihex planck.elf planck.eep || exit 0
|
|
|
|
Creating Extended Listing: planck.lss
|
|
avr-objdump -h -S -z planck.elf > planck.lss
|
|
|
|
Creating Symbol Table: planck.sym
|
|
avr-nm -n planck.elf > planck.sym
|
|
|
|
Size after:
|
|
text data bss dec hex filename
|
|
18602 82 155 18839 4997 planck.elf
|
|
|
|
-------- end --------
|
|
```
|
|
|
|
If you do not get the above, you **did not** build the firmware, and you will have nothing to flash. If you have the fresh clone from `github`, it was probably something gone wrong in this install process, go check and see what didn't work and threw errors or what steps you might have missed.
|
|
|
|
But if everything went OK, you are ready to flash! Press the reset button on the bottom of the Planck, wait two seconds, then:
|
|
```
|
|
$ make dfu
|
|
```
|
|
.
|
|
.
|
|
.
|
|
profit!!!
|
|
|
|
|
|
|
|
|
|
|
|
##extra bits...
|
|
|
|
###Installing Precompiled `dfu-programmer` Binaries (not recommended for `cygwin`)
|
|
To install the `dfu-programmer` from the binaries, we must get if from [the `dfu-programmer` website](https://dfu-programmer.github.io/) ([0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip)).
|
|
|
|
Copy this file into your `cygwin` home\src directory. (For me, it is `C:\cygwin64\home\Kevin\src`), extract the files, move `dfu-programmer.exe` to `~/local/avr/bin`. Most obnoxiously, the `libusb0_x86.dll` and `libusb0.sys` need to be moved from `./dfu-prog-usb-1.2.2/x86/` to a directory in the `Windows` `PATH` and the `cygwin` `PATH`. This is because the `dfu-programmer` binary is `mingw` based, not `cygwin` based, so the `dlls` do not cooperate. I achieved acceptable pathing by moving the files to `C:\cygwin64\home\Kevin\local\avr\bin` Then, in a `WINDOWS` command prompt running (Adjusting your path for username, etc. as needed):
|
|
```
|
|
C:\> set PATH=%PATH%;C:\cygwin64\home\Kevin\local\avr\bin
|
|
```
|
|
|
|
Then, rename `libusb0_x86.dll` to `libusb0.dll`.
|
|
|
|
You can tell that you were successful by trying to execute 'dfu-programmer' from the 'cygwin' prompt:
|
|
```
|
|
$ which dfu-programmer
|
|
/home/Kevin/local/avr/bin/dfu-programmer
|
|
|
|
$ dfu-programmer
|
|
dfu-programmer 0.7.2
|
|
https://github.com/dfu-programmer/dfu-programmer
|
|
Type 'dfu-programmer --help' for a list of commands
|
|
'dfu-programmer --targets' to list supported target devices
|
|
```
|
|
|
|
If you are not getting the above result, you will not be able to flash the firmware!
|
|
- Try making sure your `PATH` variables are set correctly for both `Windows` and `cygwin`.
|
|
- Make sure the `dll` is named correctly.
|
|
- Do not extract it with `cygwin`'s `unzip` as it does not set the executable permission. If you did it anyway, do `chmod +x dfu-programmer.exe`.
|
|
- Still have problems? Try building it instead.
|
|
|
|
|
|
##Debugging Tools
|
|
|
|
These tools are for debugging your firmware, etc. before flashing. Theoretically, it can save your memory from wearing out. However, these tool do not work 100% for the Planck firmware.
|
|
|
|
### `gdb` for AVR
|
|
`gdb` has a simulator for AVR but it does not support all instructions (like WDT), so it immediately crashes when running the Planck firmware (because `lufa.c` disables the WDT in the first few lines of execution). But it can still be useful in debugging example code and test cases, if you know how to use it.
|
|
|
|
```
|
|
$ cd ~/src
|
|
$ git clone git://sourceware.org/git/binutils-gdb.git
|
|
$ cd binutils-gdb
|
|
$ mkdir obj-avr
|
|
$ cd obj-avr
|
|
$ ../configure --prefix=$PREFIX --target=avr --build=x86_64-unknown-cygwin --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --disable-nls --enable-static
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
### `simulavr`
|
|
`simulavr` is an AVR simulator. It runs the complied AVR elfs. `simulavr` does not support the `atmega32u4` device... it does `atmega32` but that is not good enough for the firmware (no PORTE and other things), so you cannot run the Planck firmware. I use it to simulate ideas I have for features in separate test projects.
|
|
|
|
This one is a major pain in the butt because it has a lot of dependencies and it is buggy. I will do my best to explain it but... it was hard to figure out. A few things need to be changed in the 'Makefile' to make it work in `cygwin`.
|
|
|
|
|
|
```
|
|
$ cd ~/src
|
|
$ git clone https://github.com/Traumflug/simulavr.git
|
|
$ cd simulavr
|
|
$ ./bootstrap
|
|
$ ./configure --prefix=$PREFIX --enable-static --disable-tcl --disable-doxygen-doc
|
|
```
|
|
Edit `src/Makefile.am` now so that `-no-undefined` is included (I did this by removing the SYS_MINGW conditional surrounding `libsim_la_LDFLAGS += -no-undefined` and `libsimulavr_la_LDFLAGS += -no-undefined \ libsimulavr_la_LIBADD += $(TCL_LIB)`. Also, `$(EXEEXT)` is added after `kbdgentables` in two places.
|
|
|
|
```
|
|
$ make
|
|
$ make install
|
|
```
|
|
|
|
|
|
TODO:
|
|
- git repos for all sources
|
|
- command line magic for cygwin setup
|
|
- better options for `dfu-drivers`
|