mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-27 03:21:15 +00:00
9e757bc2ec
* Initial Source for Pad Pocket * Added Tap Dance and Combo Configurations * Updated LED Count * Updated read me * Updated Readme * -Removed config.h file - Added tap dance and combos to keymap level - Removed tap dance and combos from keyboard.json - Fixed conflict with submodules * Fixed Formatting
27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# pad_pocket
|
|
|
|
|
|
|
|
A simple 2-Key Macropad Keychain based off an RP2040 Development Board and a custom PCB that is pre-programmed to control media.
|
|
|
|
* Keyboard Maintainer: [Jon Henry](https://github.com/togkey86)
|
|
* Hardware Supported: Togkey Pad Pocket/Duo PCB, RP2040 Pro Micro Development Board
|
|
* Hardware Availability: (https://togkey.com)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make togkey/pad_pocket:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make togkey/pad_pocket:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (The left key closest to the USB Port) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |