mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-27 03:21:15 +00:00
177e461d90
* Initial Commit for Adding TogKey Pad and TogKey Pad Plus to QMK * Added TogKey Pad default Keymap * Changed Pins for Encoder * added images to read me * Updated Read Me Pictures Links * Applied Suggested Changes and Formatting to keyboard.json * Applied suggested keycodes to keymap.c for togkey pad * Updated Hardware Availability Links in Readme * Set development board instead of seperate bootloader and processor. * Added pad_plus.c for oled. Added config.h for pad_plus. Applied Suggested Changes. * - Moved oled arrays outside of oled_task function. - Removed white spaces from pad_plus keymaps. - Made suggested changes to oled_task function. * Updated with Changes - Updated pad json. Removed extra features, remvoed rgb test from rgb animations. - Updated pad_plus functions - Updated Pad Plus Config file * Readded display defintion. * Corrected OLED resolution definition. * Applied Suggested Changes - Updated Copyright Information - Updated Layout Names - Updated TogKey Pad Layout * Applied Suggested Changes - Removed move layer function. - Repolaced with "TO" keycodes - Updated OLED images * Fixed Layout name in keyboard.json for togkey pad * - Updated Readme for both pad and pad plus. - Updated Oled pictures for pad plus. * - Added bootmagic and extrakey features to togkey pad keyboard.json.
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# pad_plus
|
|
|
|
|
|
|
|
A 6-Key Macropad featuring a Oled Screen and Rotary Encoder based off an RP2040 and custom PCB.
|
|
|
|
* Keyboard Maintainer: [Jon Henry](https://github.com/togkey86)
|
|
* Hardware Supported: TogKey Pad Plus PCB, RP2040 Development Board
|
|
* Hardware Availability: (https://togkey.com)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make togkey/pad_plus:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make togkey/pad_plus:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|