qmk_firmware/keyboards/keychron/c3_pro/readme.md
adophoxia fa98117a3e
Add Keychron C3 Pro (Red & RGB) (#24874)
* Add Keychron C3 Pro variants

* Update to upstream standards

* Apply suggestions from code review

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

* Reformatted `keyboard.json` for `red`/`rgb` and `c3_pro.c`

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/keychron/c3_pro/ansi/red/config.h

Co-authored-by: Daniel <1767914+iamdanielv@users.noreply.github.com>

* Apply suggestions from code review

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Add C Pro V2 variants

* remove boards by accident

---------

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Daniel <1767914+iamdanielv@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2025-01-29 12:28:58 -07:00

29 lines
1.1 KiB
Markdown

# Keychron C3 Pro
![Keychron C3 Pro](https://i.imgur.com/b4FTJsf.jpg)
A customizable 87% keyboard.
* Keyboard Maintainer: [Keychron](https://github.com/keychron)
* Hardware Supported: Keychron C3 Pro
* Hardware Availability: [Keychron](https://www.keychron.com/)
Make example for this keyboard (after setting up your build environment):
make keychron/c3_pro/ansi/red:default
make keychron/c3_pro/ansi/rgb:default
Flashing example for this keyboard:
make keychron/c3_pro/ansi/red:default:flash
make keychron/c3_pro/ansi/rgb:default:flash
## bootloader
Enter the bootloader in two ways:
* **Bootmagic reset**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard.
* **Physical reset button**: Briefly press the RESET button under the spacebar.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).