mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
391c0428c9
* Add support for Envious.Design Keyboards
Add various RP2040 keyboards I've designed.
* Fixed missing newlines at EOF.
* Ran CLANG-FORMAT and sorted out any potential issues.
* Gave keyboards all unique product IDs
* Made requested changes.
* removed all VIAL related code
* sorted out license on all *.h or *.h files
* removed outdated RESET Keycode
* missed some VIAL bits
* Made suggested changes
* Made Suggested Changes
* missed one file to change.
* Attempted fix of CI issues
* Update .gitmodules
* Revert "Update .gitmodules"
This reverts commit f4bace5162.
* hopefully fixed all CI and QMK lint issues
* resolve more CI errors and a couple typos
* fixed last remaining issue as of now
* made requested changes
* further more on suggested change
* Delete README.md
* derpy workaround to change case of readme
* finished up 65M firmware
via does not work, I will investigate another time.
* re-did a lot of 65M firmware bits, also fixed via for this board
* corrected mistake in firmware
* made suggested change to info.json for 65m/60F
* finished 65M non via keymap and re-sorted via keymap
* Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c
* Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c
* Apply suggestions from code review
Verified updated Info.json works for aforementioned keyboards,
* Follow-up commit with aforementioned suggested changes
* Apply suggestions from code review
correction to a couple typos pointed out.
* follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap
* Apply suggestions from code review
* Added images of PCB to each Keyboard README
* Apply suggestions from code review
* Update keyboards/enviousdesign/60f/readme.md
* Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard
* made requested changes
* Update config.h
* used QMK migrate to update info.json
* Apply suggestions from code review
* Update keyboards/enviousdesign/65m/info.json
* renamed named keyboards as suggested and added commission keyboard to repo
* renamed file to hopefully please lint
* renamed things to be all lower case since lint doesn't appear to look for upper case
* updated keymap.c and removed unnecessary file
* fixed readme and a couple other bits
* converted various aspects to json information
* attempt fix for lint error
* fix some issues I overlooked
* Apply suggestions from code review
* moved some folders about as suggested
* Made suggested changes
* Apply suggestions from code review
* removed outdated config.h
* fixed errors in 65M and mini1800
* Apply suggestions from code review
* Update keyboards/enviousdesign/delirium/rev1/info.json
* Update keyboards/enviousdesign/65m/info.json
* Apply suggestions from code review
1.6 KiB
1.6 KiB
EnvKB 60F
A low cost Standard 60% Design which takes inspiration from the CFTKB Mysterium.
- Keyboard Maintainer: Envious-Data
- Hardware Supported: EnvKB 60F (Pi Pico)
- Hardware Availability: GitHub
Make example for this keyboard (after setting up your build environment):
make enviousdesign/60f:default
Flashing example for this keyboard:
make enviousdesign/60f:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset: Hold down the
BOOTSELbutton on the Pi Pico, then either plug the board in or press theRESETbutton. - Keycode in layout: Press the key mapped to
QK_BOOT. In the pre-supplied keymaps it is on the second layer, replacing the Tab key.
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.