mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-26 02:51:14 +00:00
31 lines
1.2 KiB
Markdown
31 lines
1.2 KiB
Markdown
# Keychron C2 Pro V2
|
|
|
|
|
|
|
|
A customizable 100% keyboard.
|
|
|
|
Rev1 is based on STM32L432 and rev2 is based on STM32F402.
|
|
|
|
* Keyboard Maintainer: [Keychron](https://github.com/keychron)
|
|
* Hardware Supported: Keychron C2 Pro
|
|
* Hardware Availability: [Keychron C2 Pro QMK/VIA Wired Mechanical Keyboard](https://www.keychron.com/products/keychron-c2-pro-qmk-via-wired-mechanical-keyboard)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make keychron/c2_pro_v2/ansi/rgb:default
|
|
make keychron/c2_pro_v2/ansi/white:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make keychron/c2_pro_v2/ansi/rgb:default:flash
|
|
make keychron/c2_pro_v2/ansi/white:default:flash
|
|
|
|
## bootloader
|
|
|
|
Enter the bootloader in two ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard.
|
|
* **Physical reset button**: Briefly press the RESET button under the spacebar.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|