mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-21 07:02:01 +00:00
9f44488bb1
* Add directpins 21 keys pico - https://learn.adafruit.com/diy-pico-mechanical-keyboard-with-fritzing-circuitpython/21-key-pico-keyboard * Rename from 21keys to pico_pad * Add pico_pad readme * Update bootloader instruction --------- Co-authored-by: Dai <dai@ovacoda.com>
26 lines
1.3 KiB
Markdown
26 lines
1.3 KiB
Markdown
# PICO PAD
|
|
|
|
|
|
|
|
A RP2040 powered direct pins QMK keyboard in 3x7 layout.
|
|
|
|
A guide can be found here: [Pico Mechanical Keyboard](https://learn.adafruit.com/diy-pico-mechanical-keyboard-with-fritzing-circuitpython/overview)
|
|
|
|
* Keyboard Maintainer: [IcyAvocado](https://github.com/icyavocado)
|
|
* Hardware Supported: [Pico 1 Microcontrollers - RP2040](https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html#pico-1-family)
|
|
* Hardware Availability: [The PiHut](https://thepihut.com/products/raspberry-pi-pico) | [Adafruit Parts](https://learn.adafruit.com/diy-pico-mechanical-keyboard-with-fritzing-circuitpython/overview)
|
|
|
|
Make example for this board (after setting up your build environment):
|
|
|
|
```sh
|
|
qmk compile -kb adafruit/pico_pad -km default
|
|
```
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader:
|
|
* **Physical reset button**: Briefly press the reset button on the left of the PCB - some may have pads you must short instead
|
|
* **Boot button**: Press and hold the BOOTSEL button on the pico when powered on
|