mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-24 18:11:14 +00:00
ce9713c47d
Co-authored-by: jack <jack@pngu.org> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
29 lines
1.2 KiB
Markdown
29 lines
1.2 KiB
Markdown
# Starry FRL
|
|
|
|
|
|
|
|
This firmware support for both Solder and Hotswap PCB of Starry FRL
|
|
|
|
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `uf2` appropriate for your board.
|
|
|
|
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
|
|
* Hardware Supported: Starry FRL
|
|
* Hardware Availability: [Waifu.works Discord](https://discord.gg/waifuworks)
|
|
|
|
Make examples for this keyboard (after setting up your build environment):
|
|
|
|
make salane/starryfrl:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make salane/starryfrl:default:flash
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Press the key `BOOT` in the back of PCB and plug in keyboard
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |