qmk_firmware/keyboards/hineybush/h101/readme.md

28 lines
1.1 KiB
Markdown

# h101
![h101](https://i.imgur.com/LqmvjS1h.png)
F13 full-size PCB with 1.25u function row Spacing.
* Keyboard Maintainer: [hineybush](https://github.com/hineybush)
* Hardware Supported: h101 using STM32F072
* Hardware Availability: Fossil by Carolina Mech
Make example for this keyboard (after setting up your build environment):
make hineybush/h101:default
Flashing example for this keyboard:
make hineybush/h101:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available