Update existing keymaps to enable MIDI_BASIC functionality. Also added
an option MIDI_ENABLE_STRICT to be strict about keycode use (which also
reduces memory footprint at runtime)
tone array:
text data bss dec hex filename
0 25698 0 25698 6462 satan_newsboytko.hex
0x6480 bytes written into 0x7000 bytes memory (89.73%).
note on array:
text data bss dec hex filename
0 25802 0 25802 64ca satan_newsboytko.hex
0x6500 bytes written into 0x7000 bytes memory (90.18%).
The previous two options were COL2ROW, ROW2COL; this adds CUSTOM_MATRIX
to disable the built-in matrix scanning code.
Most notably, this obviates the need to set MATRIX_ROW_PINS or
MATRIX_COL_PINS.
since the keycode for a tap dance process gets process only after the
TAPPING_TERM timeout, you really only have ONESHOT_TIMEOUT -
TAPPING_TERM time to tap or double tap on the key. This fix save the
oneshot_mods into the action.state structure and applies the mods with
the keycode when it's registered. It also unregisters the mod when the
the tap dance process gets reset.
Scenario:
Locking the KC_LSHIFT, and then using a tap dance key that registers a
S(KC_9) will unregister the KC_LSHIFT.
The tap dance or any keycode that is registered should not have the
side effect of cancelling a locked moditifier. We should be using a
similar logic as the TMK codes in tmk_core/comman/action.c:158.
A macro key can now be easily set to act as a modifier on hold, and
press a shifted key when tapped. Or to switch layers when held, and
again press a shifted key when tapped.
Various other helper defines have been created which send macros when
the key is pressed, released and tapped, cleaning up the
action_get_macro function inside keymap definitions.
The layer switching macros require a GCC extension - 'compound
statements enclosed within parentheses'. The use of this extension is
already present within the macro subsystem of this project, so its use
in this commit should not cause any additional issues.
MACRO_NONE had to be cast to a (macro_t*) to suppress compiler
warnings within some tapping macros.
In register_code16 and unregister_code16 we call register_code and
unregister_code twice, once for the mods and once for the keycode.
The (un)register_code have many check to see that keycode we have sent
however because we know that we are sending it a mods key, why not
just skip all of it and call (un)register_mods instead. This will skip
alot of checks and should speedup the loop a little.
Since we can't read the real_mods and oneshot_mods static variable
directly within the update_user_visualizer_state
function (Threading and serial link). We are know storing the mods
states in the visualizer_keyboard_status_t structure. We can now
display the status of the modifier keys on the LCD display.
Fix memory leaks by using stack instead of malloc
Reduce memory usage by having less temporary bufffers
Remove warnings by adding includes
Decrease code size by 608 bytes (mostly due to not linking malloc)
More robust handling of buffer overflows
Unlike the arduino functions, these don't take abstract pin numbers,
they take pin labels like `B0`. Also, rather than taking very
generic parameter names, these take slightly more descriptive
enum values.
These improve the clarity of code that would otherwise be inscrutable
bit manipulation in tersely named port register names.
Define a default TAPPING_TERM in quantum.c, for keyboards that do not
have it set. Fixes the CI failure.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When one holds a Space Cadet shift, to have it act as a shift, so that
mouse behaviour changes, when released without any other key pressed, it
still registers a paren. To remedy this, add a hold timeout: if the key
is held longer than TAPPING_TERM, it will not register the parens.
Fixes#884, with the side-effect of not being able to have parens
trigger the OS-side repeat anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
There was an odd case, which confused the hell out of tap-dance: suppose
you had a number of tap-dance keys, on a layer, and as part of the
tap-dance, you turned that layer off - or had it on one-shot to begin
with. In this case, the keydown event would trigger the tap-dance key,
but the keyup would not. This had two funky consequences:
- tap-dance did not correctly register that the dance has ended.
- pressing any other tap-dance key would interrupt the previous
tap-dance, and potentially input unwanted characters.
To fix this, we simply do not start a tap-dance sequence on keyup, only
when it is pressed. This way the previous sequence has enough time to
time-out and finish properly, and we don't get confused.
This fixesalgernon/ergodox-layout#107.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
There may be cases where one would like to know the current Unicode
input mode, without having to keep track of it themselves. Add a
function that does just this.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
In order to not declare the same variable in multiple objects (which
happens when building UCIS-enabled keymap for both the ErgoDox EZ and
the ErgoDox Infinity), move the declaration to the .c file, and keep
only an extern reference in the header.
Many thanks to @fredizzimo for spotting the error in Travis, and
suggesting the fix.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
These functions register not only the 8bit keycode, but the modifiers
too. It doesn't handle the full range of the upper 8bits, just the mods,
but that's a good start.
Changed the tap-dance pair functions to use these, so one can do:
`ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN)`
...and that will do the right thing.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This reworks how the tap-dance feature works: instead of one global
state, we have a state for each tap-dance key, so we can cancel them
when another tap-dance key is in flight. This fixes#527.
Since we have a state for each key, we can avoid situation where a keyup
would mess with our global state. This fixes#563.
And while here, we also make sure to fire events only once, and this
fixes#574.
There is one breaking change, though: tap-dance debugging support was
removed, because dumping the whole state would increase the firmware
size too much. Any keymap that made use of this, will have to be
updated (but there's no such keymap in the repo).
Also, there's a nice trick used in this rework: we need to iterate
through tap_dance_actions in a few places, to check for timeouts, and so
on. For this, we'd need to know the size of the array. We can't discover
that at compile-time, because tap-dance gets compiled separately. We'd
like to avoid having to terminate the list with a sentinel value,
because that would require updates to all keymaps that use the feature.
So, we keep track of the highest tap-dance code seen so far, and iterate
until that index.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Include `action_tapping.h`, so the keymap does not have to define a
`TAPPING_TERM` for us, and we can use the default.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When entering unicode codes, use some delay, so the OS has time to
process the information. This is not needed on all systems, but some
seem to require it.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
It turns out that register_hex32 did not work reliably, and some systems
only allow 7 chars after the unicode magic sequence, while others allow
8. To remedy the situation, store the codes as strings, and type those
in instead of doing bit shifting magic.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Extract out the part of `qk_ucis_start` that inputs the placeholder
symbol, and make it weak, so it can be overridden.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
If the symbol name being entered is longer than the max, stop recording
it, and stop processing keycodes apart from the ones that can delete,
finish or cancel the sequence.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The purpose of this change is to allow keymaps to specify a dictionary
of unicode symbol name to code mappings, and let the person at the
keyboard enter unicode symbols by name.
This is done by having a way to trigger unicode symbol input mode, when
all keys are cached until Esc, Enter or Space are pressed. Once that
happens, we try to look up the symbol from our lookup table. If found,
we erase back, and type the unicode magic in to get that symbol. If not
found, we still erase back, start unicode input mode, and replay what
the user typed in.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This moves the unicode input start / end sequences into their own
functions, so keymaps and other functionality can build on it too.
At the same time, it changes how the Linux variant works, to match
reality: CTRL+SHIFT must be unregistered too, and we close the thing
with a Space instead.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
In the header, this was defined as `set_unicode_input_mode`, but the
implementation had `set_unicode_mode` for a name. Changed the
implementation to match the header.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Removes a number of duplicated code, by passing actions around instead
of keycodes, so the various dance action functions do not have to look
up the action, but the caller does that for them.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Refactored the code a little, so all callbacks now receive a `user_data`
pointer, which can be anything. As an example, the key pairs from
`ACTION_TAP_DANCE_DOUBLE` now use this, and custom, built-in functions.
This makes it easier to extend the tap dance functionality, and also
simplifies the code a little.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
With this change, tap dance will now store the pressed state of the
tap-dance key, and allow one to make an action sooner, while the key is
still held, and only unregister when the key is released.
The registration must happen in the `on_dance_finished` callback, while
unregistering goes to `on_reset`. The surrounding code makes sure not to
call either multiple times.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
when using tap dance, we have the `regular` callback that is called on
the last tap. this commit adds an `anyway` callback that is called on
every tap, and a `reset` callback that is called on reset of the tap
dance taps.
Moves RGB controls out of the macro function and assigns them their own
keycodes:
RGB_TOG (toggle on/off)
RGB_MOD (mode step)
RGB_HUI (increase hue)
RGB_HUD (decrease hue)
RGB_SAI (increase saturation)
RGB_SAD (decrease saturation)
RGB_VAI (increase brightness)
RGB_VAD (decrease brightness)
