qmk_firmware/keyboards/mode/m256ws
2024-09-24 21:04:15 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Relocate m256ws VIA logic (#24009) 2024-06-29 04:20:08 +01:00
halconf.h [Keyboard] Add Mode M256-WS and M256-WH (#20502) 2023-07-10 20:50:18 -07:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
matrix_diagram.md Mode M256-WS Community Layout Support (#22020) 2023-09-14 12:07:22 -07:00
mcuconf.h Remove STM32_PWM_USE_ADVANCED references (#24432) 2024-09-24 21:04:15 +10:00
readme.md [Keyboard] Add Mode M256-WS and M256-WH (#20502) 2023-07-10 20:50:18 -07:00

Mode M256-WS PCB QMK Firmware

m256wh

The M256-WS is the hotswap version PCB support for the Mode Envoy.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCBs using the STM32F401 microcontroller
  • Hardware Availability: as of april 18, these PCBs are on the verge of being sold with the first kits of the Mode Envoy.

How to flash

In order to flash this PCB, first build the default layout (after setting up your build environment):

make mode/m256ws:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (escape key, layer 1 of the default keymap)