mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 12:46:41 +00:00

History

Ryan ccb6c908dd Remove `SOFT_SERIAL_PIN` for non-split boards (#19774 ) * Remove `SOFT_SERIAL_PIN` for non-split boards * Delete more empty config.h		2023-02-08 23:57:42 +00:00
..
keymaps	[Keyboard] Add Acperience12 macropad (#12573 )	2021-04-20 10:21:39 -07:00
rev1	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
acperience12.c	[Keyboard] Add Acperience12 macropad (#12573 )	2021-04-20 10:21:39 -07:00
acperience12.h	[Keyboard] Add Acperience12 macropad (#12573 )	2021-04-20 10:21:39 -07:00
readme.md	[Keyboard] Add Acperience12 macropad (#12573 )	2021-04-20 10:21:39 -07:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00

readme.md

Acperience12

Acperience12 is 12 keys macropad.

Keyboard Maintainer: yynmt
Hardware Supported: The A12 PCB
Hardware Availability: This repository has the plate files and other files.

Enter the bootloader: Press the reset button. The reset button is located on the top side of the PCB between SW9,10 and SW11,12. Insert a long thin stick (e.g. SIM eject tool or paper clip) into the hole on the top plate.

Make example for this macropad (after setting up your build environment):

make yynmt/acperience12:default

Flashing example for this macropad:

make yynmt/acperience12:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.