mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-29 06:30:17 +00:00

History

Ryan f9aeea64c1 Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )		2023-02-08 18:41:46 +11:00
..
keymaps	RESET -> QK_BOOT default keymaps (#17037 )	2022-05-15 20:26:27 +01:00
config.h	Debounce defines cleanup (#19742 )	2023-02-03 19:19:58 +00:00
info.json	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
readme.md	[Keyboard] Add OwLab Jelly Epoch (#14190 )	2021-08-30 11:29:15 -07:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
soldered.c	[Keyboard] Add OwLab Jelly Epoch (#14190 )	2021-08-30 11:29:15 -07:00
soldered.h	[Keyboard] Add OwLab Jelly Epoch (#14190 )	2021-08-30 11:29:15 -07:00

Jelly Epoch - soldered PCB

A 75% made by Owlab.

Keyboard Maintainer: owlab, kb-elmo
Hardware Supported: Jelly Epoch soldered PCB
Hardware Availability: Ended groupbuy: https://www.popkeyboard.com/products/jrrgvdsyu47wer

Make example for this keyboard (after setting up your build environment):

make owlab/jelly_epoch/soldered:default

Flashing example for this keyboard:

make owlab/jelly_epoch/soldered:default:flash

Bootloader: Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.