mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-27 13:40:14 +00:00

History

Joel Challis 831deac212 Migrate build target markers to keyboard.json (#23293 )		2024-03-30 11:31:50 +00:00
..
keymaps/default	[Keyboard] Add Orthograph (#21770 )	2023-12-24 10:16:05 -08:00
config.h	Migrate RGB Matrix config to info.json - NOPQ (#22866 )	2024-01-10 09:55:09 +00:00
keyboard.json	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
orthograph.c	LED drivers: update keyboard LED configs (#23073 )	2024-02-25 21:29:37 +00:00
readme.md	[Keyboard] Add Orthograph (#21770 )	2023-12-24 10:16:05 -08:00

Orthograph

Split ortho keyboard with RGB backlighting

Keyboard Maintainer: vladkvit
Hardware Supported: Two PCBs + thin Pro Micro compatible boards (Elite C has been extensively tested). Boards with castellated holes (Elite C style) are much easier to install. Maximum thickness is around 3-3.5mm, so a stock Pro Micro (4mm) will not work.
Hardware Availability: https://github.com/vladkvit/orthograph_keyboard for PCB, https://cad.onshape.com/documents/4f736d64448134c948af475a/w/ccab05fd44a7db98ce27216a/e/49ebfb6b27080b9b45bea74a?renderMode=0&uiState=64dd45dbc62cae486db10048 and https://cad.onshape.com/documents/5ff52821d2cb196f3db3d1e8/w/04b7cb21b748da89c8df31e6/e/486b72e32db97b2dfdf00af8 for the hardware

Make example for this keyboard (after setting up your build environment):

qmk compile -kb orthograph -km default

Flashing example for this keyboard: qmk flash -kb orthograph -km default Then, flash EEPROM with handedness (left / right) on both sides.

The reset button is on the underside of each half of the keyboard.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB
Keycode in layout: Press the key mapped to QK_BOOT if it is available