mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-25 02:49:55 +00:00
feb5e4aaeb
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
81 lines
2.3 KiB
C
81 lines
2.3 KiB
C
#ifndef SOFT_SERIAL_H
|
|
#define SOFT_SERIAL_H
|
|
|
|
#include <stdbool.h>
|
|
|
|
// /////////////////////////////////////////////////////////////////
|
|
// Need Soft Serial defines in serial_config.h
|
|
// /////////////////////////////////////////////////////////////////
|
|
// ex.
|
|
// #define SERIAL_PIN_DDR DDRD
|
|
// #define SERIAL_PIN_PORT PORTD
|
|
// #define SERIAL_PIN_INPUT PIND
|
|
// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2
|
|
// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2
|
|
//
|
|
// //// USE Simple API (OLD API, compatible with let's split serial.c)
|
|
// ex.
|
|
// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
|
// #define SERIAL_MASTER_BUFFER_LENGTH 1
|
|
//
|
|
// //// USE flexible API (using multi-type transaction function)
|
|
// #define SERIAL_USE_MULTI_TRANSACTION
|
|
//
|
|
// /////////////////////////////////////////////////////////////////
|
|
|
|
|
|
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
|
/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
|
|
#if SERIAL_SLAVE_BUFFER_LENGTH > 0
|
|
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
|
#endif
|
|
#if SERIAL_MASTER_BUFFER_LENGTH > 0
|
|
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
|
#endif
|
|
|
|
void serial_master_init(void);
|
|
void serial_slave_init(void);
|
|
int serial_update_buffers(void);
|
|
|
|
#endif // USE Simple API
|
|
|
|
// Soft Serial Transaction Descriptor
|
|
typedef struct _SSTD_t {
|
|
uint8_t *status;
|
|
uint8_t initiator2target_buffer_size;
|
|
uint8_t *initiator2target_buffer;
|
|
uint8_t target2initiator_buffer_size;
|
|
uint8_t *target2initiator_buffer;
|
|
} SSTD_t;
|
|
|
|
// initiator is transaction start side
|
|
void soft_serial_initiator_init(SSTD_t *sstd_table);
|
|
// target is interrupt accept side
|
|
void soft_serial_target_init(SSTD_t *sstd_table);
|
|
|
|
// initiator resullt
|
|
#define TRANSACTION_END 0
|
|
#define TRANSACTION_NO_RESPONSE 0x1
|
|
#define TRANSACTION_DATA_ERROR 0x2
|
|
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
|
int soft_serial_transaction(void);
|
|
#else
|
|
int soft_serial_transaction(int sstd_index);
|
|
#endif
|
|
|
|
// target status
|
|
// *SSTD_t.status has
|
|
// initiator:
|
|
// TRANSACTION_END
|
|
// or TRANSACTION_NO_RESPONSE
|
|
// or TRANSACTION_DATA_ERROR
|
|
// target:
|
|
// TRANSACTION_DATA_ERROR
|
|
// or TRANSACTION_ACCEPTED
|
|
#define TRANSACTION_ACCEPTED 0x4
|
|
#ifdef SERIAL_USE_MULTI_TRANSACTION
|
|
int soft_serial_get_and_clean_status(int sstd_index);
|
|
#endif
|
|
|
|
#endif /* SOFT_SERIAL_H */
|