gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 19:39:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
f9aeea64c1
qmk_firmware/keyboards/cannonkeys/db60
History
Ryan f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
hotswap Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
j02 Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
keymaps cannonkeys/db60/hotswap: fix layouts (#18982) 2022-11-07 16:16:41 +11:00
rev2 Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Debounce defines cleanup (#19742) 2023-02-03 19:19:58 +00:00
db60.c CannonKeys DB60 (Daughterboard60) PCB (#8208) 2020-04-11 23:21:36 +01:00
db60.h Some fixes for the Bakeneko variant DB60s (#12662) 2021-05-12 10:52:15 +10:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md Some fixes for the Bakeneko variant DB60s (#12662) 2021-05-12 10:52:15 +10:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

CannonKeys DB60

DB60 "Daughterboard 60" Keyboard

  • Keyboard Maintainer: Andrew Kannan
  • Hardware Supported: STM32F072CBT6 (or equivalent)

Make example for this keyboard (after setting up your build environment):

make cannonkeys/db60/rev2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Some notes about the versions: The original DB60 was shipped with the J-02. To build that, you will need to use the following command:

make cannonkeys/db60/j02:default

Solderable DB60s were shipped with keyboards after the J-02. This variant has cutouts along the top and bottom to support O-ring gasket mounting. To build these, you can use this command:

make cannonkeys/db60/rev2:default

Hotswap ANSI DB60s were shipped with the Bakeneko keyboards from CannonKeys. These also have the o-ring gasket mounting points. To build this:

make cannonkeys/db60/hotswap:default