History

Ryan 1cb1a5a374 Remove legacy Grave Escape keycodes (#18787 )		2022-10-20 18:04:11 -07:00
..
keymaps	Remove legacy Grave Escape keycodes (#18787 )	2022-10-20 18:04:11 -07:00
config.h	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
info.json	Move keyboard USB IDs and strings to data driven: Y (#17926 )	2022-08-06 18:52:13 +10:00
just60.h	move @yangdigi 's keyboards to a YDKB folder (#15681 )	2022-01-02 00:07:01 -08:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	move @yangdigi 's keyboards to a YDKB folder (#15681 )	2022-01-02 00:07:01 -08:00

readme.md

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, QK_BOOT, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Keyboard Maintainer: Jianfei Wang
Hardware Supported: Just60 (atmega32u4)
Hardware Availability: https://item.taobao.com/item.htm?id=564176654249

Make example for this keyboard (after setting up your build environment):

make ydkb/just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.