qmk_firmware/keyboards/planck/keymaps/ab/keymap.c

124 lines
4.8 KiB
C

#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Symbolic names for macro IDs.
#define _QWERTY 0 // QUERTY layer
#define _LOWER 1 // Lower layer
#define _RAISE 2 // Raise layer
#define _CUSTOM 3 // Custom layer (LOWER + RAISE)
#define _BL 4 // Backlight
#define _MOB 5 // Mobile#
#define _CUS1 6 // Custom macro 1
#define _CUS2 7 // Custom macro 2
// Macro shortcuts.
#define QWERTY M(_LOWER)
#define LOWER M(_LOWER)
#define RAISE M(_RAISE)
#define CUSTOM M(_CUSTOM)
#define BL M(_BL)
#define MOB M(_MOB)
#define CUS1 M(_CUS1)
#define CUS2 M(_CUS2)
// Func macro definitions.
#define LWR_PGDN LT(_LOWER, KC_PGDN) // Tap for PgDn, hold for LOWER
#define RSE_PGUP LT(_RAISE, KC_PGUP) // Tap for PgUp, hold for RAISE
#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK)
#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift
#define ZM_NRM FUNC(4) // Zoom normal
#define ZM_IN FUNC(5) // Zoom out
#define ZM_OUT FUNC(6) // Zoom in
#define EM_UNDO FUNC(7) // Emacs Undo
// Enable these functions using FUNC(n) macro.
const uint16_t PROGMEM fn_actions[] = {
[2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS),
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
[4] = ACTION_MODS_KEY(MOD_LCTL, KC_0),
[5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),
[6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS),
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
};
// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_planck_grid( /* QWERTY */
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT,
KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
[_LOWER] = LAYOUT_planck_grid( /* LOWER */
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
BL, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_RAISE] = LAYOUT_planck_grid( /* RAISE */
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_GRV, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, EM_UNDO, KC_VOLD, KC_VOLU, KC_MUTE
),
[_CUSTOM] = LAYOUT_planck_grid( /* CUSTOM */
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MOB, KC_TRNS, CUS1, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
// Set a layer persistently.
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Macro actions for each corresponding ID.
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _RAISE: // Raised layer.
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _LOWER: // Lowered layer.
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _BL: // Backlight
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
case _MOB: // Your mobile# here.
return MACRODOWN(T(1), T(2), T(3), T(MINS),
T(1), T(2), T(3), T(MINS),
T(1), T(2), T(3), T(4),
END);
case _CUS1: // Your custom macro 1
return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(SPC), END);
case _CUS2: // Your custom macro 2
return MACRODOWN(T(L), T(S), T(SPC), T(MINS), T(L), T(ENT), END);
};
return MACRO_NONE;
}