mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-13 13:20:46 +00:00
1.3 KiB
1.3 KiB
Krush60
A 60% keyboard sold in several variants.
- Solder: 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the .hex
or .bin
appropriate for your board.
- Keyboard Maintainer: SawnsProjects
- Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
- Hardware Availability: Mechkey.store
Make examples for this keyboard (after setting up your build environment):
make sawnsprojects/krush/krush60/solder:default
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESET
if it is available
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.