qmk_firmware/keyboards/black_hellebore
Ryan 522048725f
Move `RGB_MATRIX_DRIVER` to data driven (#20350)
2023-04-08 18:08:08 +10:00
..
keymaps [Keyboard] Add the Black Hellebore (#19655) 2023-01-24 01:19:42 -08:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
halconf.h [Keyboard] Add the Black Hellebore (#19655) 2023-01-24 01:19:42 -08:00
info.json Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00
mcuconf.h [Keyboard] Add the Black Hellebore (#19655) 2023-01-24 01:19:42 -08:00
readme.md [Keyboard] Add the Black Hellebore (#19655) 2023-01-24 01:19:42 -08:00
rules.mk Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

The Black Hellebore

Make example for this keyboard (after setting up your build environment):

make black_hellebore:default

Flashing example for this keyboard:

make black_hellebore:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available