mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-11 12:20:55 +00:00

History

Ryan 36c410592d Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` (#18399 )		2022-09-23 22:46:23 +10:00
..
common	Clean up includes for glcdfont headers (#7745 )	2020-03-01 17:56:50 +11:00
keymaps	RESET -> QK_BOOT user keymaps (#17940 )	2022-08-21 23:55:30 +01:00
rev1	Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` (#18399 )	2022-09-23 22:46:23 +10:00
.noci	Initial list of keyboards to exclude from CI (#11213 )	2020-12-21 15:38:39 +01:00
config.h	[Keyboard] Create RGBKB Folder (#5858 )	2019-05-14 11:58:56 -07:00
readme.md	[Keyboard] Create RGBKB Folder (#5858 )	2019-05-14 11:58:56 -07:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00
zygomorph.c	[Keyboard] Create RGBKB Folder (#5858 )	2019-05-14 11:58:56 -07:00
zygomorph.h	[Keyboard] Create RGBKB Folder (#5858 )	2019-05-14 11:58:56 -07:00

readme.md

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.