gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-24 20:32:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
f391f88088
qmk_firmware/keyboards/senselessclay/gos65
History
James Young 8413411571
Migrate LOCKING_*_ENABLE to Data-Driven: S, Part 1 (#23783) 
Affects:

  - `salicylic_acid3/7skb/rev1`
  - `salicylic_acid3/7splus`
  - `salicylic_acid3/ajisai74`
  - `salicylic_acid3/ergoarrows`
  - `salicylic_acid3/getta25/rev1`
  - `salicylic_acid3/jisplit89/rev1`
  - `salicylic_acid3/nafuda`
  - `salicylic_acid3/naked48/rev1`
  - `salicylic_acid3/naked60/rev1`
  - `salicylic_acid3/naked64/rev1`
  - `salicylic_acid3/nknl7en`
  - `salicylic_acid3/nknl7jp`
  - `salicylic_acid3/setta21/rev1`
  - `sandwich/keeb68`
  - `satt/vision`
  - `sauce/mild`
  - `scatter42`
  - `sck/gtm`
  - `sck/m0116b`
  - `sck/neiso`
  - `sekigon/grs_70ec`
  - `sendyyeah/pix`
  - `senselessclay/ck65`
  - `senselessclay/gos65`
  - `senselessclay/had60`
  - `sentraq/s60_x/default`
  - `sentraq/s60_x/rgb`
  - `sentraq/s65_plus`
  - `sentraq/s65_x`
  - `sets3n/kk980`
  - `shambles`
  - `shandoncodes/flygone60/rev3`
  - `shandoncodes/mino/hotswap`
  - `shapeshifter4060`
  - `shiro`
  - `shk9`
  - `sidderskb/majbritt/rev2`
  - `sixkeyboard`
  - `skeletonkbd/skeletonnumpad`
  - `skme/zeno`
2024-05-23 20:38:43 +01:00
..
keymaps Change all RGB mode keycodes to short aliases (#23691) 2024-05-12 10:05:11 +10:00
gos65.c Move single LAYOUTs to data driven (#20365) 2023-04-12 13:42:51 +10:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: S, Part 1 (#23783) 2024-05-23 20:38:43 +01:00
readme.md

readme.md

gos65

A 65% keyboard implementation based around the ATMEGA32u4 with per-key RGB. Designed for the GOS65 from OPS Keyboard.

  • Keyboard Maintainer: hadi
  • Hardware Supported: gos65 PCB

Make example for this keyboard (after setting up your build environment):

make senselessclay/gos65:default

Flashing example for this keyboard:

make senselessclay/gos65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

If you'd like to reset the board into bootloader mode for flashing using QMK Toolbox, simply press the reset button directly above the controller assembly on the bottom side of the PCB.