mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 11:29:26 +00:00

History

Joel Challis e869c80af7 Migrate build target markers to keyboard.json - HI (#23540 )		2024-04-17 02:49:17 +01:00
..
keymaps	VIA Protocol 12 + fixes (#19916 )	2023-02-23 09:19:00 +11:00
config.h	[Keyboard] Add hardwareabstraction/handwire Board (#18504 )	2022-10-10 09:37:25 +01:00
handwire.c	Clean up usage of `QMK_KEYBOARD_H` (#20167 )	2023-03-20 08:12:05 +11:00
keyboard.json	Migrate build target markers to keyboard.json - HI (#23540 )	2024-04-17 02:49:17 +01:00
readme.md	[Keyboard] Add hardwareabstraction/handwire Board (#18504 )	2022-10-10 09:37:25 +01:00
rules.mk	Data-Driven Keyboard Conversions: H, Part 1 (#23524 )	2024-04-15 19:19:08 +01:00

Hardware Abstraction Handwire

A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer.

Keyboard Maintainer: Andy Tsai
Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
Hardware Availability: https://hardwareabstraction.com

Make example for this keyboard (after setting up your build environment):

make hardwareabstraction/handwire:default

Flashing example for this keyboard:

make hardwareabstraction/handwire:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers.
Keycode in layout: Press the key mapped to QK_BOOT if it is available. This can be configured in VIA or on the QMK configurator.