mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-30 15:05:50 +00:00
220551ed5f
* GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here
34 lines
1.2 KiB
Markdown
34 lines
1.2 KiB
Markdown
# Satan GH60
|
|
|
|
A clone of the GH60 60% keyboard, with full backlighting support.
|
|
|
|
Keyboard Maintainer: QMK Community
|
|
Hardware Supported: Satan GH60 PCB
|
|
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make satan:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## RGB Underglow (WS2812B LED Strip)
|
|
|
|
This board also supports underglow with a slight mod.
|
|
|
|
Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
|
|
|
|
|
|
|
|
Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
|
|
|
|
|
|
|
|
## ISP Header
|
|
|
|
If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|---|----|---|----|-----|---|----|
|
|
|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|
|