gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-25 02:49:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
ed773ab73c
qmk_firmware/keyboards/geekboards/macropad_v2
History
Joel Challis 83a32b2574
Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 
* Remove 1k USB_POLLING_INTERVAL_MS config from keyboard level

* Remove 1k USB_POLLING_INTERVAL_MS config from default|via keymaps
2022-02-26 03:20:57 +00:00
..
keymaps Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 2022-02-26 03:20:57 +00:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
macropad_v2.c [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
macropad_v2.h [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.