gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-14 22:00:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
ec5d801848
qmk_firmware/keyboards/fjlabs/avalon
History
James Young 1de01151e3
FJLabs Avalon Layout Additions and Touch-Up (#20620) 
* add matrix_diagram.md

* info.json: correct key sequence

Fixes an off-by-one error between Right Split Backspace and Enter.

* refactor and unify keymaps

Edit the `default` and `via` keymaps for consistency layer-to-layer, to each other, and to the `info.json` layout data.

* info.json: apply friendly formatting

* add LAYOUT_ansi_blocker_split_bs

* add LAYOUT_ansi_blocker

* add LAYOUT_ansi_blocker_tsangan_split_bs

* add LAYOUT_ansi_blocker_tsangan

* add LAYOUT_iso_blocker_split_bs

* add LAYOUT_iso_blocker

* add LAYOUT_iso_blocker_tsangan_split_bs

* add LAYOUT_iso_blocker_tsangan

* add layout reference keymaps

* info.json: remove extra line breaks

* edit maintainer value
2023-04-29 22:52:30 -07:00
..
keymaps FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
matrix_diagram.md FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
readme.md FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Avalon PCB by FJLaboratories

The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.

Make example for this keyboard (after setting up your build environment):

make fjlabs/avalon:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available