gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 19:39:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
ec1e936dfb
qmk_firmware/keyboards/infinity60/led_controller.c
jpetermans ec1e936dfb fixed bit shift in led_set_bit
2017-04-13 17:51:37 -07:00

551 lines
18 KiB
C
Raw Blame History

/*
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* LED controller code
* WF uses IS31FL3731C matrix LED driver from ISSI
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
*/
#include "ch.h"
#include "hal.h"
#include "print.h"
#include "led.h"
#include "led_controller.h"
#include "suspend.h"
#include "usb_main.h"
/* Infinity60 LED MAP
- digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
*Unused in Alphabet Layout
*/
/*
each page has 0xB4 bytes
0 - 0x11: LED control (on/off):
order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
CAn controls Cn-8 .. Cn-1 (LSbit)
0x12 - 0x23: blink control (like "LED control")
0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
*/
/* Which LED should be used for CAPS LOCK indicator
* The usual Caps Lock position is C4-6, so the address is
* 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
#if !defined(CAPS_LOCK_LED_ADDRESS)
#define CAPS_LOCK_LED_ADDRESS 46
#endif
#if !defined(NUM_LOCK_LED_ADDRESS)
#define NUM_LOCK_LED_ADDRESS 85
#endif
/* Which LED should breathe during sleep */
#if !defined(BREATHE_LED_ADDRESS)
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
#endif
/* =================
* ChibiOS I2C setup
* ================= */
static const I2CConfig i2ccfg = {
400000 // clock speed (Hz); 400kHz max for IS31
};
/* ==============
* variables
* ============== */
// internal communication buffers
uint8_t tx[2] __attribute__((aligned(2)));
uint8_t rx[1] __attribute__((aligned(2)));
// buffer for sending the whole page at once (used also as a temp buffer)
uint8_t full_page[0xB4+1] = {0};
// LED mask (which LEDs are present, selected by bits)
// See page comment above, control alternates CA matrix/CB matrix
// IC60 pcb uses only CA matrix.
// Each byte is a control pin for 8 leds ordered 8-1
const uint8_t all_on_leds_mask[0x12] = {
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
};
// array to hold brightness pwm steps
const uint8_t pwm_levels[5] = {
0x00, 0x16, 0x4E, 0xA1, 0xFF
};
// array to write to pwm register
uint8_t pwm_register_array[9] = {0};
/* ============================
* communication functions
* ============================ */
msg_t is31_select_page(uint8_t page) {
tx[0] = IS31_COMMANDREGISTER;
tx[1] = page;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
is31_select_page(page);
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
is31_select_page(page);
tx[0] = reg;
tx[1] = data;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
is31_select_page(page);
tx[0] = reg;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
}
/* ========================
* initialise the IS31 chip
* ======================== */
void is31_init(void) {
// just to be sure that it's all zeroes
__builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes)
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
// disable hardware shutdown
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOB, 16);
chThdSleepMilliseconds(10);
// software shutdown
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
chThdSleepMilliseconds(10);
// software shutdown disable (i.e. turn stuff on)
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(10);
// zero all LED registers on all 8 pages
uint8_t i;
for(i=0; i<8; i++) {
is31_write_data(i, full_page, 0xB4 + 1);
chThdSleepMilliseconds(1);
}
}
/* ==================
* LED control thread
* ================== */
#define LED_MAILBOX_NUM_MSGS 5
static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
mailbox_t led_mailbox;
static THD_WORKING_AREA(waLEDthread, 256);
static THD_FUNCTION(LEDthread, arg) {
(void)arg;
chRegSetThreadName("LEDthread");
uint8_t i, page;
uint8_t control_register_word[2] = {0};
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
//persistent status variables
uint8_t backlight_status, led_step_status, layer_status;
//mailbox variables
uint8_t temp, msg_type, msg_led;
msg_t msg;
/* //control register variables
uint8_t page, save_page, save_breath1, save_breath2;
msg_t msg, retval;
*/
// initialize persistent variables
backlight_status = 0;
led_step_status = 4; //full brightness
layer_status = 0;
while(true) {
// wait for a message (asynchronous)
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
// be processed right away)
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
msg_type = (msg >> 8) & 0xFF; //first byte is msg type
msg_led = (msg) & 0xFF; //second byte is action information
xprintf("--------------------\n");
xprintf("mailbox fetch\nmsg: %X\n", msg);
xprintf("type: %X - led: %X\n", msg_type, msg_led); //test if msg_type is 1 or 2 bytes after mask
switch (msg_type){
case KEY_LIGHT:
//TODO: lighting key led on keypress
break;
//turn on/off/toggle single led, msg_led = row/col of led
case OFF_LED:
xprintf("OFF_LED\n");
set_led_bit(7, control_register_word, msg_led, 0);
is31_write_data (7, control_register_word, 0x02);
if (layer_status > 0) {//check current led page to prevent double blink
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
}
layer_status = 7;
break;
case ON_LED:
xprintf("ON_LED\n");
set_led_bit(7, control_register_word, msg_led, 1);
is31_write_data (7, control_register_word, 0x02);
if (layer_status > 7) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
}
layer_status = 7;
break;
case TOGGLE_LED:
xprintf("TOGGLE_LED\n");
set_led_bit(7, control_register_word, msg_led, 2);
is31_write_data (7, control_register_word, 0x02);
if (layer_status > 7) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
}
layer_status = 7;
break;
case TOGGLE_ALL:
xprintf("TOGGLE_ALL\n");
//msg_led = unused, TODO: consider using msg_led to toggle layer display
is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off
led_control_reg[0] = 0;
if (temp==0) {
xprintf("all leds on");
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
xprintf("all leds off");
__builtin_memset(led_control_reg+1, 0, 0x12);
}
is31_write_data(0, led_control_reg, 0x13);
if (layer_status > 0) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
}
layer_status=0;
//TODO: Double blink when all on
break;
case TOGGLE_BACKLIGHT:
//msg_led = unused
//TODO: consider Frame 0 as on/off layer and toggle led control register here
//TODO: need to test tracking of active layer with layer_state from qmk
xprintf("TOGGLE_BACKLIGHT\n");
backlight_status ^= 1;
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
layer_status = temp;
page = backlight_status == 0 ? 0 : layer_status;
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page);
break;
case TOGGLE_LAYER_LEDS://show layer indicator or full map of layer keys.
//TODO: change so user can flag which they want, indiv or full map in fn_actions
//msg_led = layer to toggle on
xprintf("TOGGLE_LAYER_LEDS\n");
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
if(temp == msg_led) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
layer_status = 7;
} else {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
layer_status = msg_led;
}
break;
case TOGGLE_NUM_LOCK:
//msg_led = 0 or 1, off/on
//TODO: confirm toggling works and doesn't get out of sync
set_lock_leds(USB_LED_NUM_LOCK, msg_led);
break;
case TOGGLE_CAPS_LOCK:
//msg_led = 0 or 1, off/on
//TODO: confirm toggling works and doesn't get out of sync
set_lock_leds(USB_LED_CAPS_LOCK, msg_led);
break;
case MODE_BREATH:
break;
case STEP_BRIGHTNESS:
//TEST: Step brightness code
//pwm_levels[] bounds checking, loop through array
//TODO: find a cleaner way to walk through this logic
if (msg_led == 0 && led_step_status == 0) {
led_step_status = 4;
} else {
led_step_status--;
}
if (msg_led == 1 && led_step_status == 4) {
led_step_status = 0;
} else {
led_step_status++;
}
//TODO: this seems a messy way to populate the pwm register
//mimic whitefox init which uses memcpy
//populate the 9 byte rows to be written to each pin, first byte is register (pin) address
for(i=1; i<9; i++) {
pwm_register_array[i]=pwm_levels[led_step_status];
}
for(i=0; i<8; i++) {
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
is31_write_data(0, pwm_register_array, 9);//first page controls pwm in all pages (init Display Option register)
}
break;
/* case LED_MSG_SLEEP_LED_ON:
// save current settings
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
retval = MSG_TIMEOUT;
temp = 6;
while(retval == MSG_TIMEOUT) {
// switch to the other page
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
temp = (temp == 6 ? 7 : 6);
// the times should be sufficiently long for IS31 to finish switching pages
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
}
// received a message (should be a wakeup), so restore previous state
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
// note: any other messages are queued
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
break;
case LED_MSG_SLEEP_LED_OFF:
// should not get here; wakeup should be received in the branch above break;
break;
*/
}
xprintf("--------------------\n");
}
}
/* ==============================
* led processing functions
* ============================== */
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) {
//returns 2 bytes led control register address and byte mask to write
uint8_t control_reg_addr, column_bit, column_byte, temp;
//first byte is led control register address 0x00
//msg_led tens column is pin#, ones column is bit position in 8-bit mask
chThdSleepMilliseconds(10);
xprintf("led_addr: %d ", led_addr);
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte
column_bit = 1<<(led_addr % 10 - 1);
is31_read_register(page,control_reg_addr,&temp);//need to maintain status of leds in this row (1 byte)
chThdSleepMilliseconds(10);
xprintf("col_bit: %X ", column_bit);
column_byte = temp;
chThdSleepMilliseconds(10);
xprintf("action: %X ", action);
switch(action) {
case 0:
xprintf("off-");
chThdSleepMilliseconds(10);
column_byte &= ~column_bit;
break;
case 1:
xprintf("on-");
chThdSleepMilliseconds(10);
column_byte |= column_bit;
break;
case 2:
xprintf("toggle-");
chThdSleepMilliseconds(10);
column_byte ^= column_bit;
break;
}
led_control_reg[0] = control_reg_addr;
led_control_reg[1] = column_byte;
chThdSleepMilliseconds(10);
xprintf("set_bit row: %X set_bit col: %X\n", led_control_reg[0], led_control_reg[1]);
}
void set_lock_leds(uint8_t lock_type, uint8_t led_on) {
uint8_t page, led_addr;
uint8_t led_control_write[2] = {0};
//TODO: consolidate control register to top level array vs. three scattered around
switch(lock_type) {
case USB_LED_NUM_LOCK:
led_addr = NUM_LOCK_LED_ADDRESS;
break;
case USB_LED_CAPS_LOCK:
led_addr = CAPS_LOCK_LED_ADDRESS;
break;
#ifdef SCROLL_LOCK_LED_ADDRESS
case USB_LED_SCROLL_LOCK:
led_addr = SCROLL_LOCK_LED_ADDRESS;
break;
#endif
#ifdef COMPOSE_LED_ADDRESS
case USB_LED_COMPOSE:
led_addr = COMPOSE_LED_ADDRESS;
break;
#endif
#ifdef SCROLL_LOCK_LED_ADDRESS
case USB_LED_KANA:
led_addr = KANA_LED_ADDRESS;
break;
#endif
}
for(page=0; page<8; page++) { //set in led_controller.h
//TODO: check if frame2 (or frame1, first byte all on), and ignore if true
//also if BACKLIGHT_OFF_LOCK_LED_OFF set
set_led_bit(page,led_control_write,led_addr,led_on);
xprintf("lock_led row: %X lock_led col%X\n", led_control_write[0], led_control_write[1]);
is31_write_data(page, led_control_write, 0x02);
chThdSleepMilliseconds(10);
}
}
void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) {
uint8_t i;
uint8_t row, col;
uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes
for(i=0;i<led_count;i++){
row = ((led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address
col = led_array[i] % 10 - 1;
led_control_register[row] |= 1<<(col);
}
is31_write_data(page, led_control_register, 0x13);
}
/* =====================
* hook into user keymap
* ===================== */
void led_controller_init(void) {
uint8_t i;
/* initialise I2C */
/* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
/* start I2C */
i2cStart(&I2CD1, &i2ccfg);
// try high drive (from kiibohd)
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
// try glitch fixing (from kiibohd)
I2CD1.i2c->FLT = 4;
chThdSleepMilliseconds(10);
/* initialise IS31 chip */
is31_init();
//set Display Option Register so all pwm intensity is controlled from Frame 1
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME);
/* set full pwm on Frame 1 */
for(i=1; i<9; i++) {
pwm_register_array[i]=0xFF;
}
for(i=0; i<8; i++) {
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
is31_write_data(0, pwm_register_array, 9);
chThdSleepMilliseconds(5);
}
//set all led bits on for Frame 2 LEDS_ALL
//TODO: set all off in init
full_page[0] = 0;
__builtin_memset(full_page+1, 0, 0x12);
is31_write_data(1, full_page, 1+0x12);
/* enable breathing when the displayed page changes */
// Fade-in Fade-out, time = 26ms * 2^N, N=3
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
// clean up the lock LEDs
set_lock_leds(USB_LED_NUM_LOCK, 0);
set_lock_leds(USB_LED_CAPS_LOCK, 0);
/* more time consuming LED processing should be offloaded into
* a thread, with asynchronous messaging. */
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
}
//TODO: Don't know equivalent QMK hooks for these
//
//void hook_usb_suspend_entry(void) {
//#ifdef SLEEP_LED_ENABLE
// chSysLockFromISR();
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
// chSysUnlockFromISR();
//#endif /* SLEEP_LED_ENABLE */
//}
//
//void hook_usb_suspend_loop(void) {
// chThdSleepMilliseconds(100);
// /* Remote wakeup */
// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
// send_remote_wakeup(&USB_DRIVER);
// }
//}
//
//void hook_usb_wakeup(void) {
//#ifdef SLEEP_LED_ENABLE
// chSysLockFromISR();
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
// chSysUnlockFromISR();
//#endif /* SLEEP_LED_ENABLE */
//}
//*/
Reference in New Issue View Git Blame Copy Permalink