qmk_firmware/keyboards/elephant42
Ryan 36c410592d
Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` (#18399)
2022-09-23 22:46:23 +10:00
..
keymaps Add elephant42 keyboard (#14336) 2022-07-02 21:22:51 +10:00
lib Add elephant42 keyboard (#14336) 2022-07-02 21:22:51 +10:00
config.h Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` (#18399) 2022-09-23 22:46:23 +10:00
elephant42.c Add elephant42 keyboard (#14336) 2022-07-02 21:22:51 +10:00
elephant42.h Add elephant42 keyboard (#14336) 2022-07-02 21:22:51 +10:00
info.json Move keyboard USB IDs and strings to data driven: E (#17815) 2022-07-30 17:23:55 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Add elephant42 keyboard (#14336) 2022-07-02 21:22:51 +10:00

readme.md

elephant42

elephant42

A split keyboard with 3x5+2 vertically staggered keys and 4 thumb keys.

Make example for this keyboard (after setting up your build environment):

make elephant42:default

Flashing example for this keyboard:

make elephant42:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available