mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 17:30:56 +00:00
46b4b4407f
* Add OLED support for Comet46 * fix length of char "name" of keylogger.c * update ssd1306 * fix rules.mk * update led-receiver keymap * Update OLED related code * add mod_state_reader & modify led_state_reader * Update OLED related files * Update kemaps * Update readme * change default-oled-display to default * Add OSM compatibility to mod_state_reader * Code formatting * Use PROGMEM to store code_to_name * Clean up satt keymap * Rename default-led keymap to defult-rgbled
163 lines
4.3 KiB
C
163 lines
4.3 KiB
C
#include <util/twi.h>
|
|
#include <avr/io.h>
|
|
#include <stdlib.h>
|
|
#include <avr/interrupt.h>
|
|
#include <util/twi.h>
|
|
#include <stdbool.h>
|
|
#include "i2c.h"
|
|
|
|
#ifdef USE_I2C
|
|
|
|
// Limits the amount of we wait for any one i2c transaction.
|
|
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
|
// 9 bits, a single transaction will take around 90μs to complete.
|
|
//
|
|
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
|
// poll loop takes at least 8 clock cycles to execute
|
|
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
|
|
|
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
|
|
|
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
|
|
|
static volatile uint8_t slave_buffer_pos;
|
|
static volatile bool slave_has_register_set = false;
|
|
|
|
// Wait for an i2c operation to finish
|
|
inline static
|
|
void i2c_delay(void) {
|
|
uint16_t lim = 0;
|
|
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
|
lim++;
|
|
|
|
// easier way, but will wait slightly longer
|
|
// _delay_us(100);
|
|
}
|
|
|
|
// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
|
|
void i2c_master_init(void) {
|
|
// no prescaler
|
|
TWSR = 0;
|
|
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
|
// Check datasheets for more info.
|
|
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
|
}
|
|
|
|
// Start a transaction with the given i2c slave address. The direction of the
|
|
// transfer is set with I2C_READ and I2C_WRITE.
|
|
// returns: 0 => success
|
|
// 1 => error
|
|
uint8_t i2c_master_start(uint8_t address) {
|
|
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
|
|
|
i2c_delay();
|
|
|
|
// check that we started successfully
|
|
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
|
return 1;
|
|
|
|
TWDR = address;
|
|
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
|
|
i2c_delay();
|
|
|
|
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
|
return 1; // slave did not acknowledge
|
|
else
|
|
return 0; // success
|
|
}
|
|
|
|
|
|
// Finish the i2c transaction.
|
|
void i2c_master_stop(void) {
|
|
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
|
|
|
uint16_t lim = 0;
|
|
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
|
lim++;
|
|
}
|
|
|
|
// Write one byte to the i2c slave.
|
|
// returns 0 => slave ACK
|
|
// 1 => slave NACK
|
|
uint8_t i2c_master_write(uint8_t data) {
|
|
TWDR = data;
|
|
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
|
|
i2c_delay();
|
|
|
|
// check if the slave acknowledged us
|
|
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
|
}
|
|
|
|
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
|
// if ack=0 the acknowledge bit is not set.
|
|
// returns: byte read from i2c device
|
|
uint8_t i2c_master_read(int ack) {
|
|
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
|
|
|
i2c_delay();
|
|
return TWDR;
|
|
}
|
|
|
|
void i2c_reset_state(void) {
|
|
TWCR = 0;
|
|
}
|
|
|
|
void i2c_slave_init(uint8_t address) {
|
|
TWAR = address << 0; // slave i2c address
|
|
// TWEN - twi enable
|
|
// TWEA - enable address acknowledgement
|
|
// TWINT - twi interrupt flag
|
|
// TWIE - enable the twi interrupt
|
|
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
|
}
|
|
|
|
ISR(TWI_vect);
|
|
|
|
ISR(TWI_vect) {
|
|
uint8_t ack = 1;
|
|
switch(TW_STATUS) {
|
|
case TW_SR_SLA_ACK:
|
|
// this device has been addressed as a slave receiver
|
|
slave_has_register_set = false;
|
|
break;
|
|
|
|
case TW_SR_DATA_ACK:
|
|
// this device has received data as a slave receiver
|
|
// The first byte that we receive in this transaction sets the location
|
|
// of the read/write location of the slaves memory that it exposes over
|
|
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
|
// slave_buffer_pos after each write.
|
|
if(!slave_has_register_set) {
|
|
slave_buffer_pos = TWDR;
|
|
// don't acknowledge the master if this memory loctaion is out of bounds
|
|
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
|
ack = 0;
|
|
slave_buffer_pos = 0;
|
|
}
|
|
slave_has_register_set = true;
|
|
} else {
|
|
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
|
BUFFER_POS_INC();
|
|
}
|
|
break;
|
|
|
|
case TW_ST_SLA_ACK:
|
|
case TW_ST_DATA_ACK:
|
|
// master has addressed this device as a slave transmitter and is
|
|
// requesting data.
|
|
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
|
BUFFER_POS_INC();
|
|
break;
|
|
|
|
case TW_BUS_ERROR: // something went wrong, reset twi state
|
|
TWCR = 0;
|
|
default:
|
|
break;
|
|
}
|
|
// Reset everything, so we are ready for the next TWI interrupt
|
|
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
|
}
|
|
#endif
|