qmk_firmware/keyboards/fjlabs/sinanjuwk
James Young 2f17ef3a0d
FJLabs Sinanju WK Layout Additions and Touch-Up (#20628)
* add matrix_diagram.md

* refactor keymaps

* fix Configurator implementation

The original C-based code had an off-by-one error in the key sequence, that was then converted in data-driven configurator without being corrected.

* info.json: apply friendly formatting

* rename LAYOUT_all to LAYOUT_60_ansi_split_bs_rshift

* add LAYOUT_60_ansi

* add LAYOUT_60_tsangan_hhkb

* add LAYOUT_60_ansi_tsangan

* add LAYOUT_60_ansi_wkl_split_bs_rshift

* add LAYOUT_60_ansi_wkl

* enable Community Layout support

* edit listed maintainer (reference GitHub username)
2023-04-29 23:23:25 -07:00
..
keymaps FJLabs Sinanju WK Layout Additions and Touch-Up (#20628) 2023-04-29 23:23:25 -07:00
config.h Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
info.json FJLabs Sinanju WK Layout Additions and Touch-Up (#20628) 2023-04-29 23:23:25 -07:00
matrix_diagram.md FJLabs Sinanju WK Layout Additions and Touch-Up (#20628) 2023-04-29 23:23:25 -07:00
readme.md FJLabs Sinanju WK Layout Additions and Touch-Up (#20628) 2023-04-29 23:23:25 -07:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Sinanju WK

The following is the QMK Firmware for the Windz Sinanju WK PCB.

Make example for this keyboard (after setting up your build environment):

make fjlabs/sinanjuwk:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.