gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-26 19:39:54 +00:00
Code Issues Packages Projects Releases Wiki Activity
df5689ed06
qmk_firmware/keyboards/mode/m80v2
History
Joel Challis d2accb48e7
RESET -> QK_BOOT keyboard readme (#18110)
2022-08-20 11:34:17 +01:00
..
m80v2h Move keyboard USB IDs and strings to data driven, pass 2: M-O (#18090) 2022-08-20 01:45:28 +01:00
m80v2s Move keyboard USB IDs and strings to data driven, pass 2: M-O (#18090) 2022-08-20 01:45:28 +01:00
chconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2021-12-29 02:57:22 -08:00
config.h Move keyboard USB IDs and strings to data driven, pass 2: M-O (#18090) 2022-08-20 01:45:28 +01:00
halconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2021-12-29 02:57:22 -08:00
m80v2.c [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2021-12-29 02:57:22 -08:00
m80v2.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2021-12-29 02:57:22 -08:00
mcuconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2021-12-29 02:57:22 -08:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

Mode Eighty V2 PCB QMK firmware

MODE80
Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F072 controller
  • Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v2/m80v2h:default # Hotswap
make mode/m80v2/m80v2s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v2/m80v2h:default:flash # Hotswap
make mode/m80v2/m80v2s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.