mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-11 20:31:02 +00:00
36ba4806b1
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: chalex <alejandrelee+magbogbro@gmail.com>
21 lines
1.1 KiB
Markdown
21 lines
1.1 KiB
Markdown
# merro60
|
|
|
|
merro60 PCB
|
|
|
|
A standard 60% format keyboard pcb with USB-C and unified daughterboard compatibility.
|
|
Has modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
|
|
|
|
Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)
|
|
Hardware Supported: chlx PCB merro60.1, merro60.1.1, merro60.1.2
|
|
|
|
Enter bootloader mode by any of the following options -
|
|
- When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
|
|
- When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
|
|
- When plugged in, shorting out the two reset metal contacts near the spacebar switch location (NOT the spacebar switch pin holes)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make chlx/merro60:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|