gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2025-02-23 23:37:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
d7fb12164a
qmk_firmware/keyboards/chlx/piche60
History
chalex 276f84a9a8
add chlx piche (#24252) 
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: chalex <alejandrelee+magbogbro@gmail.com>
2024-12-23 23:22:22 -08:00
..
keymaps/default add chlx piche (#24252) 2024-12-23 23:22:22 -08:00
keyboard.json add chlx piche (#24252) 2024-12-23 23:22:22 -08:00
readme.md add chlx piche (#24252) 2024-12-23 23:22:22 -08:00

readme.md

piche60

piche60 PCB

  • 60% alice format keyboard pcb with USB-C and unified daughterboard compatibility.
  • Layout adds 3 additional keys in the palm area voids of traditional alice format.
  • USB-C can be snapped off and converted into an ai03 C3 compatible daughterboard.
  • Left and right halves can be snapped off and connected through 14-pin JST-SH interfaces.
  • PCB can be manufactured with top-side USB-C for compatibility with legacy alice PCBs.

Keyboard Maintainer: Alexander Lee Hardware Supported: chlx PCB piche60.x.x.x; top-side USB version compatible with most keyboard cases using legacy alice format PCBs (i.e. lubrigante) Hardware Availability: sales are typically done in-stock as bulk listings on reddit's mechanical keyboard market (r/mechmarket)

Make example for this keyboard (after setting up your build environment):

make chlx/piche60:default

Flashing example for this keyboard:

make chlx/piche60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter bootloader mode by any of the following options -

  • When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
  • When already plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
  • When already plugged in, shorting out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)