qmk_firmware/keyboards/mode/m80v2

Mode Eighty V2 PCB QMK firmware

Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

• Keyboard Maintainer: Gondolindrim
• Hardware Supported: proprietary PCB using STM32F072 controller
• Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
• Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v2/m80v2h:default # Hotswap
make mode/m80v2/m80v2s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v2/m80v2h:default:flash # Hotswap
make mode/m80v2/m80v2s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.