gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-27 05:36:52 +00:00
Code Issues Packages Projects Releases Wiki Activity
d69c7849b0
qmk_firmware/keyboards/yandrstudio/nz64
History
Ryan 36c410592d
Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399)
2022-09-23 22:46:23 +10:00
..
keymaps [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
board.h [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
config.h Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399) 2022-09-23 22:46:23 +10:00
halconf.h [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
info.json [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
mcuconf.h [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
nz64.c [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
nz64.h [Keyboard] Cleanup zhou65 and add nz64 keyboard (#17032) 2022-05-11 21:48:47 -07:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate more F4x1 board files (#18046) 2022-08-15 00:25:40 +01:00

readme.md

nz64

A 64 keys keyboard with rgb (keys). This keyboard use 16mhz HSE and STM32F401 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz64:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Physical reset pins: Short circuit the bt0 and vcc pins on the back of the PCB and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.