gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-01 07:25:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
d56ee70c52
qmk_firmware/keyboards/4pplet/perk60_iso/rev_a
History
Ryan d56ee70c52
Rename DRIVER_ADDR_n defines (#22200) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-10-21 21:41:59 +10:00
..
config.h Rename DRIVER_ADDR_n defines (#22200) 2023-10-21 21:41:59 +10:00
halconf.h [Keyboard] 4pplet Perk60 (#16853) 2022-07-23 13:23:14 -07:00
info.json RGB Matrix: driver naming cleanups (#21594) 2023-08-23 01:00:03 +01:00
mcuconf.h Migrate more F4x1 board files (#18046) 2022-08-15 00:25:40 +01:00
readme.md [Keyboard] 4pplet Perk60 (#16853) 2022-07-23 13:23:14 -07:00
rev_a.c Update ISSI LED types (#22099) 2023-10-04 20:12:50 +11:00
rev_a.h Move single 60_ansi, 60_hhkb and 60_iso layouts to data driven (#20438) 2023-04-15 21:09:08 +10:00
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.