gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-24 20:32:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
d35cdcc933
qmk_firmware/keyboards/onekeyco/dango40
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
dango40.c [Keyboard] Add Dango40 (#14437) 2021-09-21 21:25:59 -07:00
dango40.h [Keyboard] Add Dango40 (#14437) 2021-09-21 21:25:59 -07:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Dango40

40% keyboard

  • Keyboard Maintainer: Swiftrax
  • Hardware Supported: Dango40
  • Hardware Availability: Dango40 PCB

Bootloader Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for flashing this keyboard (after setting up your build environment):

make onekeyco/dango40:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.