gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-04 17:05:17 +00:00
Code Issues Packages Projects Releases Wiki Activity
d339f182ba
qmk_firmware/tmk_core/protocol/lufa/lufa.c
zvecr c1b57354f6 Stub out more of broadcast messages
2022-04-05 18:54:28 +01:00

1220 lines
35 KiB
C
Raw Blame History

/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "report.h"
#include "host.h"
#include "host_driver.h"
#include "keyboard.h"
#include "action.h"
#include "led.h"
#include "sendchar.h"
#include "debug.h"
#ifdef SLEEP_LED_ENABLE
# include "sleep_led.h"
#endif
#include "suspend.h"
#include "usb_descriptor.h"
#include "lufa.h"
#include "quantum.h"
#include "usb_device_state.h"
#include <util/atomic.h>
#ifdef NKRO_ENABLE
# include "keycode_config.h"
extern keymap_config_t keymap_config;
#endif
#ifdef AUDIO_ENABLE
# include "audio.h"
#endif
#ifdef BLUETOOTH_ENABLE
# include "outputselect.h"
# ifdef BLUETOOTH_BLUEFRUIT_LE
# include "bluefruit_le.h"
# elif BLUETOOTH_RN42
# include "rn42.h"
# endif
#endif
#ifdef VIRTSER_ENABLE
# include "virtser.h"
#endif
#ifdef MIDI_ENABLE
# include "qmk_midi.h"
#endif
#ifdef RAW_ENABLE
# include "raw_hid.h"
#endif
#ifdef XAP_ENABLE
# include "xap.h"
#endif
#ifdef JOYSTICK_ENABLE
# include "joystick.h"
#endif
uint8_t keyboard_idle = 0;
/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
static uint8_t keyboard_led_state = 0;
static report_keyboard_t keyboard_report_sent;
/* Host driver */
static uint8_t keyboard_leds(void);
static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
static void send_programmable_button(uint32_t data);
host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button};
#ifdef VIRTSER_ENABLE
// clang-format off
USB_ClassInfo_CDC_Device_t cdc_device = {
.Config = {
.ControlInterfaceNumber = CCI_INTERFACE,
.DataINEndpoint = {
.Address = (CDC_IN_EPNUM | ENDPOINT_DIR_IN),
.Size = CDC_EPSIZE,
.Banks = 1
},
.DataOUTEndpoint = {
.Address = (CDC_OUT_EPNUM | ENDPOINT_DIR_OUT),
.Size = CDC_EPSIZE,
.Banks = 1
},
.NotificationEndpoint = {
.Address = (CDC_NOTIFICATION_EPNUM | ENDPOINT_DIR_IN),
.Size = CDC_NOTIFICATION_EPSIZE,
.Banks = 1
}
}
};
// clang-format on
#endif
#ifdef RAW_ENABLE
/** \brief Raw HID Send
*
* FIXME: Needs doc
*/
void raw_hid_send(uint8_t *data, uint8_t length) {
// TODO: implement variable size packet
if (length != RAW_EPSIZE) {
return;
}
if (USB_DeviceState != DEVICE_STATE_Configured) {
return;
}
// TODO: decide if we allow calls to raw_hid_send() in the middle
// of other endpoint usage.
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(RAW_IN_EPNUM);
// Check to see if the host is ready to accept another packet
if (Endpoint_IsINReady()) {
// Write data
Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL);
// Finalize the stream transfer to send the last packet
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
/** \brief Raw HID Receive
*
* FIXME: Needs doc
*/
__attribute__((weak)) void raw_hid_receive(uint8_t *data, uint8_t length) {
// Users should #include "raw_hid.h" in their own code
// and implement this function there. Leave this as weak linkage
// so users can opt to not handle data coming in.
}
/** \brief Raw HID Task
*
* FIXME: Needs doc
*/
static void raw_hid_task(void) {
// Create a temporary buffer to hold the read in data from the host
uint8_t data[RAW_EPSIZE];
bool data_read = false;
// Device must be connected and configured for the task to run
if (USB_DeviceState != DEVICE_STATE_Configured) return;
Endpoint_SelectEndpoint(RAW_OUT_EPNUM);
// Check to see if a packet has been sent from the host
if (Endpoint_IsOUTReceived()) {
// Check to see if the packet contains data
if (Endpoint_IsReadWriteAllowed()) {
/* Read data */
Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
data_read = true;
}
// Finalize the stream transfer to receive the last packet
Endpoint_ClearOUT();
if (data_read) {
raw_hid_receive(data, sizeof(data));
}
}
}
#endif
#ifdef XAP_ENABLE
extern void xap_receive(xap_token_t token, const uint8_t *data, size_t length);
void xap_send_base(uint8_t *data, uint8_t length) {
// TODO: implement variable size packet
if (length != XAP_EPSIZE) {
return;
}
if (USB_DeviceState != DEVICE_STATE_Configured) {
return;
}
// TODO: decide if we allow calls to raw_hid_send() in the middle
// of other endpoint usage.
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(XAP_IN_EPNUM);
// Check to see if the host is ready to accept another packet
if (Endpoint_IsINReady()) {
// Write data
Endpoint_Write_Stream_LE(data, XAP_EPSIZE, NULL);
// Finalize the stream transfer to send the last packet
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
void xap_send(xap_token_t token, xap_response_flags_t response_flags, const void *data, size_t length) {
uint8_t rdata[XAP_EPSIZE] = {0};
xap_response_header_t *header = (xap_response_header_t *)&rdata[0];
header->token = token;
if (length > (XAP_EPSIZE - sizeof(xap_response_header_t))) response_flags &= ~(XAP_RESPONSE_FLAG_SUCCESS);
header->flags = response_flags;
if (response_flags & (XAP_RESPONSE_FLAG_SUCCESS)) {
header->length = (uint8_t)length;
if (data != NULL) {
memcpy(&rdata[sizeof(xap_response_header_t)], data, length);
}
}
xap_send_base(rdata, sizeof(rdata));
}
void xap_broadcast(uint8_t type, const void *data, size_t length) {
uint8_t rdata[XAP_EPSIZE] = {0};
xap_broadcast_header_t *header = (xap_broadcast_header_t *)&rdata[0];
header->token = XAP_BROADCAST_TOKEN;
header->type = type;
if (length > (XAP_EPSIZE - sizeof(xap_broadcast_header_t))) return;
header->length = (uint8_t)length;
if (data != NULL) {
memcpy(&rdata[sizeof(xap_broadcast_header_t)], data, length);
}
xap_send_base(rdata, sizeof(rdata));
}
void xap_receive_base(const void *data) {
const uint8_t * u8data = (const uint8_t *)data;
xap_request_header_t *header = (xap_request_header_t *)&u8data[0];
if (header->length <= (XAP_EPSIZE - sizeof(xap_request_header_t))) {
xap_receive(header->token, &u8data[sizeof(xap_request_header_t)], header->length);
}
}
static void xap_task(void) {
// Create a temporary buffer to hold the read in data from the host
uint8_t data[XAP_EPSIZE];
bool data_read = false;
// Device must be connected and configured for the task to run
if (USB_DeviceState != DEVICE_STATE_Configured) return;
Endpoint_SelectEndpoint(XAP_OUT_EPNUM);
// Check to see if a packet has been sent from the host
if (Endpoint_IsOUTReceived()) {
// Check to see if the packet contains data
if (Endpoint_IsReadWriteAllowed()) {
/* Read data */
Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
data_read = true;
}
// Finalize the stream transfer to receive the last packet
Endpoint_ClearOUT();
if (data_read) {
xap_receive_base(data);
}
}
}
#endif // XAP_ENABLE
/*******************************************************************************
* Console
******************************************************************************/
#ifdef CONSOLE_ENABLE
/** \brief Console Task
*
* FIXME: Needs doc
*/
static void Console_Task(void) {
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured) return;
uint8_t ep = Endpoint_GetCurrentEndpoint();
# if 0
// TODO: impl receivechar()/recvchar()
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
/* Check to see if a packet has been sent from the host */
if (Endpoint_IsOUTReceived())
{
/* Check to see if the packet contains data */
if (Endpoint_IsReadWriteAllowed())
{
/* Create a temporary buffer to hold the read in report from the host */
uint8_t ConsoleData[CONSOLE_EPSIZE];
/* Read Console Report Data */
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
/* Process Console Report Data */
//ProcessConsoleHIDReport(ConsoleData);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
}
# endif
/* IN packet */
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
// fill empty bank
while (Endpoint_IsReadWriteAllowed())
Endpoint_Write_8(0);
// flush sendchar packet
if (Endpoint_IsINReady()) {
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
#endif
/*******************************************************************************
* Joystick
******************************************************************************/
#ifdef JOYSTICK_ENABLE
void send_joystick_packet(joystick_t *joystick) {
uint8_t timeout = 255;
static joystick_report_t r;
r = (joystick_report_t) {
# if JOYSTICK_AXES_COUNT > 0
.axes =
{ joystick->axes[0],
# if JOYSTICK_AXES_COUNT >= 2
joystick->axes[1],
# endif
# if JOYSTICK_AXES_COUNT >= 3
joystick->axes[2],
# endif
# if JOYSTICK_AXES_COUNT >= 4
joystick->axes[3],
# endif
# if JOYSTICK_AXES_COUNT >= 5
joystick->axes[4],
# endif
# if JOYSTICK_AXES_COUNT >= 6
joystick->axes[5],
# endif
},
# endif // JOYSTICK_AXES_COUNT>0
# if JOYSTICK_BUTTON_COUNT > 0
.buttons = {
joystick->buttons[0],
# if JOYSTICK_BUTTON_COUNT > 8
joystick->buttons[1],
# endif
# if JOYSTICK_BUTTON_COUNT > 16
joystick->buttons[2],
# endif
# if JOYSTICK_BUTTON_COUNT > 24
joystick->buttons[3],
# endif
}
# endif // JOYSTICK_BUTTON_COUNT>0
};
/* Select the Joystick Report Endpoint */
Endpoint_SelectEndpoint(JOYSTICK_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Joystick Report Data */
Endpoint_Write_Stream_LE(&r, sizeof(joystick_report_t), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
}
#endif
/*******************************************************************************
* USB Events
******************************************************************************/
/*
* Event Order of Plug in:
* 0) EVENT_USB_Device_Connect
* 1) EVENT_USB_Device_Suspend
* 2) EVENT_USB_Device_Reset
* 3) EVENT_USB_Device_Wake
*/
/** \brief Event USB Device Connect
*
* FIXME: Needs doc
*/
void EVENT_USB_Device_Connect(void) {
print("[C]");
/* For battery powered device */
if (!USB_IsInitialized) {
USB_Disable();
USB_Init();
USB_Device_EnableSOFEvents();
}
}
/** \brief Event USB Device Connect
*
* FIXME: Needs doc
*/
void EVENT_USB_Device_Disconnect(void) {
print("[D]");
/* For battery powered device */
USB_IsInitialized = false;
/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
if (USB_IsInitialized) {
USB_Disable(); // Disable all interrupts
USB_Controller_Enable();
USB_INT_Enable(USB_INT_VBUSTI);
}
*/
}
/** \brief Event USB Device Connect
*
* FIXME: Needs doc
*/
void EVENT_USB_Device_Reset(void) {
print("[R]");
usb_device_state_set_reset();
}
/** \brief Event USB Device Connect
*
* FIXME: Needs doc
*/
void EVENT_USB_Device_Suspend() {
print("[S]");
usb_device_state_set_suspend(USB_Device_ConfigurationNumber != 0, USB_Device_ConfigurationNumber);
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif
}
/** \brief Event USB Device Connect
*
* FIXME: Needs doc
*/
void EVENT_USB_Device_WakeUp() {
print("[W]");
#if defined(NO_USB_STARTUP_CHECK)
suspend_wakeup_init();
#endif
usb_device_state_set_resume(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber);
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
// NOTE: converters may not accept this
led_set(host_keyboard_leds());
#endif
}
#ifdef CONSOLE_ENABLE
static bool console_flush = false;
# define CONSOLE_FLUSH_SET(b) \
do { \
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { \
console_flush = b; \
} \
} while (0)
/** \brief Event USB Device Start Of Frame
*
* FIXME: Needs doc
* called every 1ms
*/
void EVENT_USB_Device_StartOfFrame(void) {
static uint8_t count;
if (++count % 50) return;
count = 0;
if (!console_flush) return;
Console_Task();
console_flush = false;
}
#endif
/** \brief Event handler for the USB_ConfigurationChanged event.
*
* This is fired when the host sets the current configuration of the USB device after enumeration.
*
* ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4,
* it is safe to use single bank for all endpoints.
*/
void EVENT_USB_Device_ConfigurationChanged(void) {
bool ConfigSuccess = true;
#ifndef KEYBOARD_SHARED_EP
/* Setup keyboard report endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((KEYBOARD_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1);
#endif
#if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP)
/* Setup mouse report endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((MOUSE_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1);
#endif
#ifdef SHARED_EP_ENABLE
/* Setup shared report endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((SHARED_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, SHARED_EPSIZE, 1);
#endif
#ifdef RAW_ENABLE
/* Setup raw HID endpoints */
ConfigSuccess &= Endpoint_ConfigureEndpoint((RAW_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, RAW_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint((RAW_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_INTERRUPT, RAW_EPSIZE, 1);
#endif
#ifdef XAP_ENABLE
/* Setup XAP endpoints */
ConfigSuccess &= Endpoint_ConfigureEndpoint((XAP_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, XAP_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint((XAP_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_INTERRUPT, XAP_EPSIZE, 1);
#endif // XAP_ENABLE
#ifdef CONSOLE_ENABLE
/* Setup console endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((CONSOLE_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, CONSOLE_EPSIZE, 1);
# if 0
ConfigSuccess &= Endpoint_ConfigureEndpoint((CONSOLE_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_INTERRUPT, CONSOLE_EPSIZE, 1);
# endif
#endif
#ifdef MIDI_ENABLE
/* Setup MIDI stream endpoints */
ConfigSuccess &= Endpoint_ConfigureEndpoint((MIDI_STREAM_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint((MIDI_STREAM_OUT_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
#endif
#ifdef VIRTSER_ENABLE
/* Setup virtual serial endpoints */
ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_NOTIFICATION_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_BULK, CDC_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, CDC_EPSIZE, 1);
#endif
#ifdef JOYSTICK_ENABLE
/* Setup joystick endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((JOYSTICK_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1);
#endif
#if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP)
/* Setup digitizer endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1);
#endif
usb_device_state_set_configuration(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber);
}
/* FIXME: Expose this table in the docs somehow
Appendix G: HID Request Support Requirements
The following table enumerates the requests that need to be supported by various types of HID class devices.
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
------------------------------------------------------------------------------------------
Boot Mouse Required Optional Optional Optional Required Required
Non-Boot Mouse Required Optional Optional Optional Optional Optional
Boot Keyboard Required Optional Required Required Required Required
Non-Boot Keybrd Required Optional Required Required Optional Optional
Other Device Required Optional Optional Optional Optional Optional
*/
/** \brief Event handler for the USB_ControlRequest event.
*
* This is fired before passing along unhandled control requests to the library for processing internally.
*/
void EVENT_USB_Device_ControlRequest(void) {
uint8_t *ReportData = NULL;
uint8_t ReportSize = 0;
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest) {
case HID_REQ_GetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
Endpoint_ClearSETUP();
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
// TODO: test/check
ReportData = (uint8_t *)&keyboard_report_sent;
ReportSize = sizeof(keyboard_report_sent);
break;
}
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
Endpoint_ClearOUT();
}
break;
case HID_REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
#if defined(SHARED_EP_ENABLE) && !defined(KEYBOARD_SHARED_EP)
case SHARED_INTERFACE:
#endif
Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived())) {
if (USB_DeviceState == DEVICE_STATE_Unattached) return;
}
if (Endpoint_BytesInEndpoint() == 2) {
uint8_t report_id = Endpoint_Read_8();
if (report_id == REPORT_ID_KEYBOARD || report_id == REPORT_ID_NKRO) {
keyboard_led_state = Endpoint_Read_8();
}
} else {
keyboard_led_state = Endpoint_Read_8();
}
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}
}
break;
case HID_REQ_GetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()))
;
Endpoint_Write_8(keyboard_protocol);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
}
break;
case HID_REQ_SetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
keyboard_protocol = (USB_ControlRequest.wValue & 0xFF);
clear_keyboard();
}
}
break;
case HID_REQ_SetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
}
break;
case HID_REQ_GetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()))
;
Endpoint_Write_8(keyboard_idle);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
break;
}
#ifdef VIRTSER_ENABLE
CDC_Device_ProcessControlRequest(&cdc_device);
#endif
}
/*******************************************************************************
* Host driver
******************************************************************************/
/** \brief Keyboard LEDs
*
* FIXME: Needs doc
*/
static uint8_t keyboard_leds(void) {
return keyboard_led_state;
}
/** \brief Send Keyboard
*
* FIXME: Needs doc
*/
static void send_keyboard(report_keyboard_t *report) {
uint8_t timeout = 255;
#ifdef BLUETOOTH_ENABLE
if (where_to_send() == OUTPUT_BLUETOOTH) {
# ifdef BLUETOOTH_BLUEFRUIT_LE
bluefruit_le_send_keys(report->mods, report->keys, sizeof(report->keys));
# elif BLUETOOTH_RN42
rn42_send_keyboard(report);
# endif
return;
}
#endif
/* Select the Keyboard Report Endpoint */
uint8_t ep = KEYBOARD_IN_EPNUM;
uint8_t size = KEYBOARD_REPORT_SIZE;
#ifdef NKRO_ENABLE
if (keyboard_protocol && keymap_config.nkro) {
ep = SHARED_IN_EPNUM;
size = sizeof(struct nkro_report);
}
#endif
Endpoint_SelectEndpoint(ep);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* If we're in Boot Protocol, don't send any report ID or other funky fields */
if (!keyboard_protocol) {
Endpoint_Write_Stream_LE(&report->mods, 8, NULL);
} else {
Endpoint_Write_Stream_LE(report, size, NULL);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
keyboard_report_sent = *report;
}
/** \brief Send Mouse
*
* FIXME: Needs doc
*/
static void send_mouse(report_mouse_t *report) {
#ifdef MOUSE_ENABLE
uint8_t timeout = 255;
# ifdef BLUETOOTH_ENABLE
if (where_to_send() == OUTPUT_BLUETOOTH) {
# ifdef BLUETOOTH_BLUEFRUIT_LE
// FIXME: mouse buttons
bluefruit_le_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons);
# elif BLUETOOTH_RN42
rn42_send_mouse(report);
# endif
return;
}
# endif
/* Select the Mouse Report Endpoint */
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Mouse Report Data */
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
#endif
}
#if defined(EXTRAKEY_ENABLE) || defined(PROGRAMMABLE_BUTTON_ENABLE)
static void send_report(void *report, size_t size) {
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured) return;
Endpoint_SelectEndpoint(SHARED_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(report, size, NULL);
Endpoint_ClearIN();
}
#endif
/** \brief Send Extra
*
* FIXME: Needs doc
*/
#ifdef EXTRAKEY_ENABLE
static void send_extra(uint8_t report_id, uint16_t data) {
static report_extra_t r;
r = (report_extra_t){.report_id = report_id, .usage = data};
send_report(&r, sizeof(r));
}
#endif
/** \brief Send System
*
* FIXME: Needs doc
*/
static void send_system(uint16_t data) {
#ifdef EXTRAKEY_ENABLE
send_extra(REPORT_ID_SYSTEM, data);
#endif
}
/** \brief Send Consumer
*
* FIXME: Needs doc
*/
static void send_consumer(uint16_t data) {
#ifdef EXTRAKEY_ENABLE
# ifdef BLUETOOTH_ENABLE
if (where_to_send() == OUTPUT_BLUETOOTH) {
# ifdef BLUETOOTH_BLUEFRUIT_LE
bluefruit_le_send_consumer_key(data);
# elif BLUETOOTH_RN42
rn42_send_consumer(data);
# endif
return;
}
# endif
send_extra(REPORT_ID_CONSUMER, data);
#endif
}
static void send_programmable_button(uint32_t data) {
#ifdef PROGRAMMABLE_BUTTON_ENABLE
static report_programmable_button_t r;
r = (report_programmable_button_t){.report_id = REPORT_ID_PROGRAMMABLE_BUTTON, .usage = data};
send_report(&r, sizeof(r));
#endif
}
/*******************************************************************************
* sendchar
******************************************************************************/
#ifdef CONSOLE_ENABLE
# define SEND_TIMEOUT 5
/** \brief Send Char
*
* FIXME: Needs doc
*/
int8_t sendchar(uint8_t c) {
// Do not wait if the previous write has timed_out.
// Because sendchar() is called so many times, waiting each call causes big lag.
// The `timed_out` state is an approximation of the ideal `is_listener_disconnected?` state.
static bool timed_out = false;
// prevents Console_Task() from running during sendchar() runs.
// or char will be lost. These two function is mutually exclusive.
CONSOLE_FLUSH_SET(false);
if (USB_DeviceState != DEVICE_STATE_Configured) return -1;
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
goto ERROR_EXIT;
}
if (timed_out && !Endpoint_IsReadWriteAllowed()) {
goto ERROR_EXIT;
}
timed_out = false;
uint8_t timeout = SEND_TIMEOUT;
while (!Endpoint_IsReadWriteAllowed()) {
if (USB_DeviceState != DEVICE_STATE_Configured) {
goto ERROR_EXIT;
}
if (Endpoint_IsStalled()) {
goto ERROR_EXIT;
}
if (!(timeout--)) {
timed_out = true;
goto ERROR_EXIT;
}
_delay_ms(1);
}
Endpoint_Write_8(c);
// send when bank is full
if (!Endpoint_IsReadWriteAllowed()) {
while (!(Endpoint_IsINReady()))
;
Endpoint_ClearIN();
} else {
CONSOLE_FLUSH_SET(true);
}
Endpoint_SelectEndpoint(ep);
return 0;
ERROR_EXIT:
Endpoint_SelectEndpoint(ep);
return -1;
}
#endif
/*******************************************************************************
* MIDI
******************************************************************************/
#ifdef MIDI_ENABLE
// clang-format off
USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface = {
.Config = {
.StreamingInterfaceNumber = AS_INTERFACE,
.DataINEndpoint = {
.Address = (MIDI_STREAM_IN_EPNUM | ENDPOINT_DIR_IN),
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1
},
.DataOUTEndpoint = {
.Address = (MIDI_STREAM_OUT_EPNUM | ENDPOINT_DIR_OUT),
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1
}
}
};
// clang-format on
void send_midi_packet(MIDI_EventPacket_t *event) {
MIDI_Device_SendEventPacket(&USB_MIDI_Interface, event);
}
bool recv_midi_packet(MIDI_EventPacket_t *const event) {
return MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, event);
}
#endif
/*******************************************************************************
* VIRTUAL SERIAL
******************************************************************************/
#ifdef VIRTSER_ENABLE
/** \brief Virtual Serial Init
*
* FIXME: Needs doc
*/
void virtser_init(void) {
cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR;
CDC_Device_SendControlLineStateChange(&cdc_device);
}
/** \brief Virtual Serial Receive
*
* FIXME: Needs doc
*/
void virtser_recv(uint8_t c) __attribute__((weak));
void virtser_recv(uint8_t c) {
// Ignore by default
}
/** \brief Virtual Serial Task
*
* FIXME: Needs doc
*/
void virtser_task(void) {
uint16_t count = CDC_Device_BytesReceived(&cdc_device);
uint8_t ch;
for (; count; --count) {
ch = CDC_Device_ReceiveByte(&cdc_device);
virtser_recv(ch);
}
}
/** \brief Virtual Serial Send
*
* FIXME: Needs doc
*/
void virtser_send(const uint8_t byte) {
uint8_t timeout = 255;
uint8_t ep = Endpoint_GetCurrentEndpoint();
if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) {
/* IN packet */
Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
Endpoint_Write_8(byte);
CDC_Device_Flush(&cdc_device);
if (Endpoint_IsINReady()) {
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
}
#endif
void send_digitizer(report_digitizer_t *report) {
#ifdef DIGITIZER_ENABLE
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured) return;
Endpoint_SelectEndpoint(DIGITIZER_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed())
_delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(report, sizeof(report_digitizer_t), NULL);
Endpoint_ClearIN();
#endif
}
/*******************************************************************************
* main
******************************************************************************/
/** \brief Setup MCU
*
* FIXME: Needs doc
*/
static void setup_mcu(void) {
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~_BV(WDRF);
wdt_disable();
// For boards running at 3.3V and crystal at 16 MHz
#if (F_CPU == 8000000 && F_USB == 16000000)
/* Divide clock by 2 */
clock_prescale_set(clock_div_2);
#else /* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
}
/** \brief Setup USB
*
* FIXME: Needs doc
*/
static void setup_usb(void) {
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
USB_Init();
// for Console_Task
USB_Device_EnableSOFEvents();
}
void protocol_setup(void) {
#ifdef MIDI_ENABLE
setup_midi();
#endif
setup_mcu();
usb_device_state_init();
}
void protocol_pre_init(void) {
setup_usb();
sei();
#if defined(BLUETOOTH_RN42)
rn42_init();
#endif
/* wait for USB startup & debug output */
#ifdef WAIT_FOR_USB
while (USB_DeviceState != DEVICE_STATE_Configured) {
# if defined(INTERRUPT_CONTROL_ENDPOINT)
;
# else
USB_USBTask();
# endif
}
print("USB configured.\n");
#else
USB_USBTask();
#endif
}
void protocol_post_init(void) {
host_set_driver(&lufa_driver);
}
void protocol_pre_task(void) {
#if !defined(NO_USB_STARTUP_CHECK)
if (USB_DeviceState == DEVICE_STATE_Suspended) {
print("[s]");
while (USB_DeviceState == DEVICE_STATE_Suspended) {
suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup();
clear_keyboard();
# if USB_SUSPEND_WAKEUP_DELAY > 0
// Some hubs, kvm switches, and monitors do
// weird things, with USB device state bouncing
// around wildly on wakeup, yielding race
// conditions that can corrupt the keyboard state.
//
// Pause for a while to let things settle...
wait_ms(USB_SUSPEND_WAKEUP_DELAY);
# endif
}
}
suspend_wakeup_init();
}
#endif
}
void protocol_post_task(void) {
#ifdef MIDI_ENABLE
MIDI_Device_USBTask(&USB_MIDI_Interface);
#endif
#ifdef BLUETOOTH_BLUEFRUIT_LE
bluefruit_le_task();
#endif
#ifdef VIRTSER_ENABLE
virtser_task();
CDC_Device_USBTask(&cdc_device);
#endif
#ifdef RAW_ENABLE
raw_hid_task();
#endif
#ifdef XAP_ENABLE
xap_task();
#endif
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif
}
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint16_t wIndex, const void **const DescriptorAddress) {
return get_usb_descriptor(wValue, wIndex, DescriptorAddress);
}
Reference in New Issue View Git Blame Copy Permalink