| .. | ||
| build_flash.sh | ||
| config.h | ||
| keymap.c | ||
| README.md | ||
Billiam's DZ60 layout
This layout is optimized for MacOS is for a Build 4 DZ60 with a 2U left shift, 2U right shift and an arrow cluster in the bottom right. Don't use this layout if you didn't get Build 4, you will enter a world of pain Donny.
Settings:
- The capslock key is replaced with a second function key.
- The Alt an Cmd keys are swapped to replicate the Mac layout.
- Del is available as Fn+Backspace
- / ? are available when you tap the right shift. Otherwise RShift is shift when held down
- RESET is available as Fn+Esc
- Underglow toggle and mode selection are available as Fn+A and Fn+S
- Media play/pause doesn't seem to work with anything but iTunes at the moment. FML
Initial Installation
I found the instructions to be longer than they had to be, and I ended up having to Google some steps anyway. These are the steps I took to get my keyboard setup, in case you are new to the process.
- Clone the qmk_firmware repo locally
# Choose one:
git clone git@github.com:qmk/qmk_firmware.git # OR
git clone https://github.com/qmk/qmk_firmware.git
-
Customize your layout by starting with a keymap. I copied StephenGrier's and modified it for DZ60 Build 4 and changed a few things, like the
gravekey,ESCand/. -
Build your hex file
make dz60:billiams # be in the qmk_firmware directory to do this
A hex file dz60_billiams.hex will be created in the base qmk_firmware directory
- Before plugging in your keyboard into your computer, hold SPACE and B keys down
- Plug the computer in, which will put the keyboard in bootlegger mode
- If you are using QMK toolbox, upload the .hex file you made above, select it and hit the flash button. Don't hit the load button, that will load the default keymap and that's not what you want! Unless it is, in which case click away.
Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to RESET the keyboard and kick it into bootleg mode again, hold the down arrow key and \. The default layout is Build 1 and sets the MENU key on that build to Fn. MENU corresponds to down arrow in build 4. You don't have to unplug the keyboard.
Hope this helps!
0 Qwerty
,-----------------------------------------------------------------------------------------.
| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |
|-----------------------------------------------------------------------------------------+
| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
|-----------------------------------------------------------------------------------------+
| Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
|-----------------------------------------------------------------------------------------+
| Shift | Z | X | C | V | B | N | M | , | . | Tap:/ RSh | U | ESC |
|-----------------------------------------------------------------------------------------+
| Ctrl | Alt | Cmd | Space | Cmd | Fn | L | D | R |
`-----------------------------------------------------------------------------------------'
1 Fn Layer
FN Layer
,-----------------------------------------------------------------------------------------.
| ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DEL |
|-----------------------------------------------------------------------------------------+
| |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| | | MUTE | Vol- | Vol+ |
|-----------------------------------------------------------------------------------------+
| | | | | | | | | | | Prev | Next | Play/Pause |
|-----------------------------------------------------------------------------------------+
| | | | | | | | |Scr- |Scr+ | | PG_UP |RESET|
|-----------------------------------------------------------------------------------------+
| | | | | | | HOME | PG_DN | END |
`-----------------------------------------------------------------------------------------'