gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 20:56:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
cbabc8dbe6
qmk_firmware/keyboards/kprepublic/bm80hsrgb
History
Albert Y cbabc8dbe6
[Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) 
* Replace Tapping Force Hold feature with Quick Tap Term

* Replace keyboard level TAPPING_FORCE_HOLD with QUICK_TAP_TERM 0

* Deprecate force hold in info_config.json

* Before and after quick tap term unit tests

* Quick tap unit tests iteration

* Keymap config.h correction

* Remove TAPPING_FORCE_HOLD_PER_KEY macros that were missed

* Add two more test cases for quick tap

* Replace TAPPING_FORCE_HOLD with QUICK_TAP_TERM in configs #2

* Replace TAPPING_FORCE_HOLD_PER_KEY with QUICK_TAP_TERM_PER_KEY in configs #2

* Add function declaration for get_quick_tap_term

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-12-12 16:52:22 +01:00
..
keymaps [Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) 2022-12-12 16:52:22 +01:00
bm80hsrgb.c rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
bm80hsrgb.h rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
config.h Change RGB_MATRIX_STARTUP_* defines to RGB_MATRIX_DEFAULT_* (#19079) 2022-11-27 04:18:24 +11:00
info.json Move keyboard USB IDs and strings to data driven: K (#17846) 2022-08-03 17:03:47 +10:00
readme.md rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

BM80HSRGB

BM80HSRGB

A tkl, hotswap, in switch RGB keyboard from KPRepublic.

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm80hsrgb:default

Flashing example for this keyboard:

make kprepublic/bm80hsrgb:default:flash

To reset the board into bootloader mode, do one of the following:

  • Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
  • Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  • Hold the Esc key while connecting the USB cable (also erases persistent settings)

All of the RGB matrix effects are enabled by default. To disable specific ones, see this section for more information.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.