mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-25 04:43:02 +00:00

History

Joel Challis 1d5ee895ad Migrate build target markers to keyboard.json - FG (#23534 )		2024-04-16 05:42:34 +01:00
..
keymaps/default
blackbowl.h
config.h
keyboard.json	Migrate build target markers to keyboard.json - FG (#23534 )	2024-04-16 05:42:34 +01:00
matrix.c	i2c: rename read/write register functions (#22905 )	2024-01-16 02:26:40 +00:00
readme.md
rules.mk	Data-Driven Keyboard Conversions: F (#23516 )	2024-04-14 18:31:26 +01:00

readme.md

frobiac/blackbowl

Custom 3D-printed and handwired 36-key split-keyboard with trackpoint developed in 2016.

Keyboard Maintainer: frobiac
Hardware Supported: Teensy-2.0, IBM Trackpoint, one MCP23018 per side, one RGB-LED
Development History: deskthority.net
Layout Alpha KLE (same as BlackBowl)
Original Firmware

Make example for this keyboard (after setting up your build environment):

make frobiac/blackbowl

Flashing example for this keyboard:

make frobiac/blackbowl:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

The I2C code is based on the code from 'handwired/dactyl', but reduced to ROW2COL and EXPANDER_COL_REGISTER=GPIOA define choices. Adjustments were made for the two I2C addresses, one per side.

Bootloader

Enter the bootloader in 2 ways:

Physical reset button: Briefly press the button on the Teensy by inserting a small pin in the small hole in the switch plate
Keycode in layout: Press the key mapped to QK_BOOT if it is available