qmk_firmware/keyboards/sol/keymaps/kageurufu
Legonut 8a330b33ff Keyboard: Add new keyboard "Sol" from RGBKB (#4497)
* Add final RGBKB Sol firmware

* Apply suggestions from code review

Apply most of the changes noroadsleft has suggested

Co-Authored-By: Legonut <legonut3@gmail.com>

* Cleanup readme

* Cleanup keymaps per @noroadslefts suggestions

* Remove eeproms, use set_single_persistent_default_layer

* Suggestions from @noroadsleft and @drashna

some small cleanup

* Change RGB_SMOD to RGB_RMOD

* fix RGB_SMOD

* Apply suggestions from code review

Remove redundant lines

Co-Authored-By: Legonut <legonut3@gmail.com>
2018-12-04 18:15:52 -08:00
..
config.h Keyboard: Add new keyboard "Sol" from RGBKB (#4497) 2018-12-04 18:15:52 -08:00
keymap.c Keyboard: Add new keyboard "Sol" from RGBKB (#4497) 2018-12-04 18:15:52 -08:00
readme.md Keyboard: Add new keyboard "Sol" from RGBKB (#4497) 2018-12-04 18:15:52 -08:00
rules.mk Keyboard: Add new keyboard "Sol" from RGBKB (#4497) 2018-12-04 18:15:52 -08:00

readme.md

KageUrufu's Sol Layout

Read the keymap for the layout, I don't want to deal with maintained ascii art

Customize

see qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk

# Variables you can set for SOL

BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
CONSOLE_ENABLE = yes        # Console for debug(+400)
COMMAND_ENABLE = yes        # Commands for debug and configuration
NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE = yes       # Enable global lighting effects. Do not enable with RGB Matrix
LED_ANIMATIONS = yes        # LED animations
LED_MIRRORED = no           # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
RGB_MATRIX_ENABLE = no      # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy (+1500)
RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no         # Unicode
SWAP_HANDS_ENABLE = no      # Enable one-hand typing
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)

OLED_ENABLE = no            # OLED_ENABLE (+5000)
IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)

Compile

go to qmk top directory.

$ cd qmk_firmware

build

$ make sol:default

After the initial flash with AVRdudess, you should be able to flash using this:

$ make sol:default:dfu