qmk_firmware/keyboards/yugo_m/model_m_101/config.h

96 lines
3.1 KiB
C

/*
Copyright 2020 Nidzo Tomic <tomicn8@hotmail.com>
Copyright 2022 an_achronism <87213873+an-achronism@users.noreply.github.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B8, B7, B6, B5, B4, B3, A15, A14 }
#define MATRIX_COL_PINS { A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
/* define if matrix has ghost */
#define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
// #define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* redefine available (emulated) EEPROM as 4 kB rather than the default 1 kB to let VIA use more of the 8 kB of on-chip Flash of the STM32F303 to store 4 layers (since 4 layers * 8 rows * 16 columns * 2 = 1024 bytes but the default max available is 1023 bytes due to ATMEGA32U4 etc. only having 1 kB of EEPROM) */
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095